Marmi di Carrara, since 1956
Get a quote

Inventory · Portoro

Portoro for wall cladding: slabs and bundles in stock in Carrara

In the Carrara warehouse Portoro is present with 9 bundles that suit wall cladding: 395 slabs, 1,822 m², thickness 2 cm and finish polished. The average slab of MDC-46 measures about 2.82 × 1.71 m, and the bundle counts 52 slabs. Imported directly and worked in our own workshops.

Why Portoro for wall cladding

Marble can be honed or polished, and a water-based protective treatment helps repel oil and wine stains without changing how the stone looks.

On tall or continuous walls consecutive slabs from the same bundle matter: the veining runs on from one to the next, and the progressive number helps to lay them in order.

The dark tone (black) has an elegant, decisive effect and hides small stains well; dust and water marks show more on the polished finish.

Thickness, weight and workmanship

In stock: thickness 2 cm. 2 cm ≈ 54 kg/m².

Consecutive slabs give book-matched panels, trimmed flush and mitred at 45° for the corners.

Indicative yield of the largest bundle: about 221 m² of wall, after a 12% allowance for waste.

Laying and care

In damp rooms the stone is laid with white adhesive (so as not to stain light stones) and sealed joints.

Of these bundles 3 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.

We also hold 12 blocks of Portoro in stock: for a large project the block can be chosen and sawn to size.

Shipping and packing from Carrara

Open the bundle page, check the photo and size of every slab and send the request with the MDC number: we reply with availability and terms.

Bundles available

Frequently asked questions

What thickness should I choose for wall cladding in Portoro?

For wall cladding 2 cm is enough; 3 cm is used for very large slabs or mechanical fixing. In stock: thickness 2 cm.

Is Portoro suitable for wall cladding?

Yes, Portoro (marble) is worked for wall cladding in our workshop. Marble is a metamorphic limestone rock: it works well, takes a polish and has unique veining, but it reacts to acids (lemon, vinegar, some cleaners) that can dull the polished surface.

How much Portoro do you have now for wall cladding?

Right now 9 bundles that fit, with 395 slabs (1,822 m²) and thickness 2 cm; MDC-46 is the largest (52 slabs, 2.82 × 1.71 m).

Do you ship Portoro outside Italy?

Slabs are packed on A-frames or in crates, strapped down and protected at the corners; bundle MDC-46 weighs about 13.5 t, a useful figure for choosing truck or container.

How is Portoro cladding fixed?

With adhesive suited to the weight or mechanical anchors for large slabs, on a flat, dry substrate. A protective treatment repeated now and then repels oil and wine; marked marble can be re-polished in the workshop.

WhatsApp
Portoro for wall cladding · slabs in Carrara