Portoro for vanity tops: slabs and bundles in stock in Carrara
For vanity tops we now hold 9 bundles of Portoro in the Carrara warehouse: 395 slabs totalling 1,822 m², thickness 2 cm, finish polished. The largest bundle is MDC-46, with 52 slabs of about 2.82 × 1.71 m. Imported directly and worked in our own workshops.
Why Portoro for vanity tops
In marble every slab has its own veining: choosing slabs from the same bundle keeps the pattern continuous from one piece to the next.
A vanity top is a small but very visible piece: it is cut from a well-chosen slab, with a cut-out for the basin and a drip edge on the front.
On a marble vanity top perfumes, dyes and toothpaste can leave marks: a sealer and a honed finish help.
A stone of black tone gives depth and contrast: it works next to light woods or white walls and asks for well-planned lighting.
Thickness, weight and workmanship
In stock: thickness 2 cm. 2 cm ≈ 54 kg/m².
A long top comes from a single slab, avoiding joints; the front can be doubled to look thicker.
Indicative yield: each slab (2.82 × 1.71 m) gives about 6 tops of 120 × 50 cm, about 312 in the largest bundle.
Laying and care
Tap holes are made in the workshop, not on site: the stone can chip.
Of these bundles 3 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.
We also hold 12 blocks of Portoro in stock: for a large project the block can be chosen and sawn to size.
Shipping and packing from Carrara
If you do not yet know how many m² you need, use the slab calculator and then ask for the quote; we can reserve several slabs of the same bundle for you.
Bundles available

Portoro MDC-126
55 slabs, 2 cm, polished, 2.71 × 1.63 m, yield ≈ 330 tops of 120 × 50 cm

Portoro MDC-130
53 slabs, 2 cm, polished, 2.82 × 1.63 m, yield ≈ 318 tops of 120 × 50 cm

Portoro MDC-46
52 slabs, 2 cm, polished, 2.82 × 1.71 m, yield ≈ 312 tops of 120 × 50 cm

Portoro MDC-45
50 slabs, 2 cm, polished, 2.58 × 1.75 m, yield ≈ 300 tops of 120 × 50 cm

Portoro MDC-44
47 slabs, 2 cm, polished, 2.81 × 1.64 m, yield ≈ 282 tops of 120 × 50 cm

Portoro MDC-43
44 slabs, 2 cm, polished, 2.81 × 1.70 m, yield ≈ 264 tops of 120 × 50 cm

Portoro MDC-128
40 slabs, 2 cm, polished, 2.81 × 1.65 m, yield ≈ 240 tops of 120 × 50 cm

Portoro MDC-127
37 slabs, 2 cm, polished, 2.68 × 1.74 m, yield ≈ 222 tops of 120 × 50 cm

Portoro MDC-15
17 slabs, 2 cm, polished, 2.60 × 1.68 m, yield ≈ 102 tops of 120 × 50 cm
Frequently asked questions
What thickness should I choose for vanity tops in Portoro?
For a vanity top 2 or 3 cm is fine; at 2 cm the front edge is doubled. In stock: thickness 2 cm.
Is Portoro suitable for vanity tops?
Portoro works for vanity tops, as long as the right thickness (2 cm) and finish (polished) are chosen. Marble can be honed or polished, and a water-based protective treatment helps repel oil and wine stains without changing how the stone looks.
How much Portoro do you have now for vanity tops?
Today in the Carrara warehouse: 9 bundles, 395 slabs, 1,822 m²; finish polished. Bundle MDC-46 has 52 slabs of about 2.82 × 1.71 m.
Do you ship Portoro outside Italy?
We ship from Carrara worldwide: slabs travel on A-frames or in ISPM 15 treated wooden crates, with corner guards and protection, and the bundle is loaded into a container or onto a truck. Times and costs are in the quote.
How do I protect a vanity top in Portoro?
With a water-based sealer after laying and a soft cloth to dry it. For daily cleaning water and a pH-neutral detergent are enough; avoid acids, descalers and abrasive sponges, which dull polished marble.
