Portoro for fireplaces: slabs and bundles in stock in Carrara
Portoro for fireplaces: the warehouse holds 9 bundles with thickness 2 cm, in all 395 slabs and 1,822 m², finish polished. Bundle MDC-46 (52 slabs, 2.82 × 1.71 m) is the one to start from when you need a lot of material with the same veining. Imported directly and worked in our own workshops.
Why Portoro for fireplaces
In marble every slab has its own veining: choosing slabs from the same bundle keeps the pattern continuous from one piece to the next.
In a fireplace symmetry matters: two jambs and a lintel cut from the same slab or from consecutive slabs give a continuous pattern.
The dark tone (black) has an elegant, decisive effect and hides small stains well; dust and water marks show more on the polished finish.
Thickness, weight and workmanship
In stock: thickness 2 cm. 2 cm ≈ 54 kg/m².
The fireplace surround is cut to drawing, with 45° mitres and a fillet where requested.
Indicative yield: each slab (2.82 × 1.71 m) gives about 7 pieces of 150 × 40 cm (jambs, mantels), about 364 in the largest bundle.
Laying and care
The surround is fixed with brackets to the wall, kept apart from the firebox with a refractory backing.
Of these bundles 3 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.
We also hold 12 blocks of Portoro in stock: for a large project the block can be chosen and sawn to size.
Shipping and packing from Carrara
If you do not yet know how many m² you need, use the slab calculator and then ask for the quote; we can reserve several slabs of the same bundle for you.
Bundles available

Portoro MDC-126
55 slabs, 2 cm, polished, 2.71 × 1.63 m, yield ≈ 330 pieces of 150 × 40 cm

Portoro MDC-130
53 slabs, 2 cm, polished, 2.82 × 1.63 m, yield ≈ 371 pieces of 150 × 40 cm

Portoro MDC-46
52 slabs, 2 cm, polished, 2.82 × 1.71 m, yield ≈ 364 pieces of 150 × 40 cm

Portoro MDC-45
50 slabs, 2 cm, polished, 2.58 × 1.75 m, yield ≈ 300 pieces of 150 × 40 cm

Portoro MDC-44
47 slabs, 2 cm, polished, 2.81 × 1.64 m, yield ≈ 329 pieces of 150 × 40 cm

Portoro MDC-43
44 slabs, 2 cm, polished, 2.81 × 1.70 m, yield ≈ 308 pieces of 150 × 40 cm

Portoro MDC-128
40 slabs, 2 cm, polished, 2.81 × 1.65 m, yield ≈ 280 pieces of 150 × 40 cm

Portoro MDC-127
37 slabs, 2 cm, polished, 2.68 × 1.74 m, yield ≈ 222 pieces of 150 × 40 cm

Portoro MDC-15
17 slabs, 2 cm, polished, 2.60 × 1.68 m, yield ≈ 102 pieces of 150 × 40 cm

Portoro MDC9141
block 295×144×168 cm, 19.3 t

Portoro MDC9142
block 193×107×101 cm, 5.6 t

Portoro MDC9237
block 187×197×108 cm, 10.7 t
Frequently asked questions
What thickness should I choose for fireplaces in Portoro?
To clad a fireplace 2 or 3 cm is enough, depending on whether the slab is set in place or fixed mechanically. In stock: thickness 2 cm.
Is Portoro suitable for fireplaces?
Yes, Portoro (marble) is worked for fireplaces in our workshop. In marble every slab has its own veining: choosing slabs from the same bundle keeps the pattern continuous from one piece to the next.
How much Portoro do you have now for fireplaces?
Right now 9 bundles that fit, with 395 slabs (1,822 m²) and thickness 2 cm; MDC-46 is the largest (52 slabs, 2.82 × 1.71 m).
Do you ship Portoro outside Italy?
Slabs are packed on A-frames or in crates, strapped down and protected at the corners; bundle MDC-46 weighs about 13.5 t, a useful figure for choosing truck or container.
Can Portoro be used around a fireplace?
Yes as a surround, kept apart from the firebox with a refractory backing: the safety distance is checked with the installer. A protective treatment repeated now and then repels oil and wine; marked marble can be re-polished in the workshop.
