Portoro for floors: slabs and bundles in stock in Carrara
Anyone looking for Portoro for floors finds real bundles here, not samples: 9 bundles, 395 slabs, 1,822 m²; thickness 2 cm, finish polished. For large projects look at MDC-46: 52 slabs of about 2.82 × 1.71 m. Imported directly and worked in our own workshops.
Why Portoro for floors
In marble every slab has its own veining: choosing slabs from the same bundle keeps the pattern continuous from one piece to the next.
For indoor floors 2 cm is the usual thickness; 3 cm is chosen where traffic is heavy or the substrate is less regular. Slabs are cut into squares, random lengths or patterns.
On a marble floor the polished finish shows foot traffic wear over time; honed ages more evenly.
The dark tone (black) has an elegant, decisive effect and hides small stains well; dust and water marks show more on the polished finish.
Thickness, weight and workmanship
In stock: thickness 2 cm. 2 cm ≈ 54 kg/m².
The slab is cut into squares, random lengths or geometric patterns; edges are finished sharp or with a small bevel, and the skirting comes from the same slab.
Indicative yield of the largest bundle: about 213 m² laid, after a 15% allowance for waste.
Laying and care
Over underfloor heating stone works well because it conducts heat: flexible adhesive and expansion joints are needed.
Of these bundles 3 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.
We also hold 12 blocks of Portoro in stock: for a large project the block can be chosen and sawn to size.
Shipping and packing from Carrara
To ask for Portoro, give the MDC number of the bundle you like (for example MDC-46) and use the guided quote: price is on request.
Bundles available

Portoro MDC-126
55 slabs, 2 cm, polished, 2.71 × 1.63 m, yield ≈ 207 m² laid

Portoro MDC-130
53 slabs, 2 cm, polished, 2.82 × 1.63 m, yield ≈ 206 m² laid

Portoro MDC-46
52 slabs, 2 cm, polished, 2.82 × 1.71 m, yield ≈ 213 m² laid

Portoro MDC-45
50 slabs, 2 cm, polished, 2.58 × 1.75 m, yield ≈ 192 m² laid

Portoro MDC-44
47 slabs, 2 cm, polished, 2.81 × 1.64 m, yield ≈ 184 m² laid

Portoro MDC-43
44 slabs, 2 cm, polished, 2.81 × 1.70 m, yield ≈ 179 m² laid

Portoro MDC-128
40 slabs, 2 cm, polished, 2.81 × 1.65 m, yield ≈ 158 m² laid

Portoro MDC-127
37 slabs, 2 cm, polished, 2.68 × 1.74 m, yield ≈ 147 m² laid

Portoro MDC-15
17 slabs, 2 cm, polished, 2.60 × 1.68 m, yield ≈ 63 m² laid
Frequently asked questions
What thickness should I choose for floors in Portoro?
For indoor floors 2 cm is the most used thickness, 3 cm where traffic is heavy or the substrate is irregular. In stock: thickness 2 cm.
Is Portoro suitable for floors?
Yes, Portoro (marble) is worked for floors in our workshop. Marble can be honed or polished, and a water-based protective treatment helps repel oil and wine stains without changing how the stone looks.
How much Portoro do you have now for floors?
Right now 9 bundles that fit, with 395 slabs (1,822 m²) and thickness 2 cm; MDC-46 is the largest (52 slabs, 2.82 × 1.71 m).
Do you ship Portoro outside Italy?
Before shipping we photograph the bundle and prepare a slab-by-slab list with numbers and sizes; the type of packing (A-frames or crates) depends on destination and vehicle.
How is a floor in Portoro laid and kept?
It is laid on a flat screed with a suitable adhesive and thin joints. A protective treatment repeated now and then repels oil and wine; marked marble can be re-polished in the workshop.
