Marmi di Carrara, since 1956
Get a quote

Guides · Marmi di Carrara · 1956

Marble or natural quartzite for kitchen and bathroom?

Updated · By Marmi di Carrara srl

Durability and strength: the hardest stone and the softest

Quartzite starts as compacted quartz sand, then transformed by heat and pressure: the result is an almost pure quartz rock, Mohs hardness 7, among the hardest natural stones that are worked. Marble is calcium carbonate, hardness 3-4: soft, workable, polishable, but scratchable with a blade. One honest warning: not every stone sold as quartzite is pure quartzite; some "soft" varieties contain limestone and behave partly like marble. That is why we run an acid and scratch test on the slab before recommending it. At 3 cm both last decades; quartzite, however, is harder to cut and work, and that weighs on workshop time.

Care: similar in the gesture, different in the risk

Both are cleaned with a pH-neutral cleaner and a microfibre cloth. Pure quartzite asks for a protective treatment every few years, because it too has slight porosity, but a mistake rarely leaves a trace. Marble asks for the treatment every one or two years and more attention: oil, wine, lemon and vinegar must be wiped straight away, and limescale removers in the bathroom are to be avoided. The real difference is this: on quartzite you can forget a cut lemon on the top, on marble you cannot. A honed finish, on both, hides small marks better than polished.

Heat and scratches: where quartzite wins

On heat both are stones and take a hot pan, with the usual advice of a trivet near cut-outs. On scratches pure quartzite is almost unbeatable: at hardness 7 neither a knife nor sand scratches it; marble does scratch and, on a polished top, the marks show. On acids pure quartzite does not react, while marble develops a dull halo. A practical warning: quartzite, precisely because it is so hard, can be more brittle at thin edges and in the corners of sink cut-outs, where we recommend rounded radii and a full 3 cm thickness.

Value over time: two unique stones

Here the two stones resemble each other: every slab of quartzite and marble is a unique piece of mountain, with veins that never repeat, and that counts in the perceived value of a home. Quartzite stays almost identical for decades; marble takes on a patina and, when it is no longer wanted, is re-honed and re-polished on site and comes back as new. Quartzite can be re-polished too, but with more effort, because it is hard. In light tones quartzite leans to greyish or beige whites with coloured veins; the luminous, slightly translucent white of Statuario and Calacatta remains a character of marble alone, and the market recognises it.

Sustainability: same nature, different distance

Quartzite and marble are both a single material, with no resin in their body, repairable, reusable and still stone at the end of their life. The difference lies in origin: almost all quartzites come from very far away and are imported directly and worked in our own workshops, so transport weighs on the environmental balance; moreover, being extremely hard, they need more energy and more tooling for cutting and polishing. Our white marbles come from our own quarries above Carrara, a few kilometres from the workshops. We say it without exaggeration: marble has a quarrying cost too, but distance and ease of working make a concrete difference.

When to choose one or the other

Choose quartzite for the hob and sink area, for a heavily used kitchen with little appetite for care, and when you like veins and colours similar to marble but do not want its limits; always ask us to check that it is a pure quartzite. Choose marble for the bathroom, shower walls, the island, the breakfast bar and any room where white and light matter, accepting the treatment every one or two years. Many projects combine the two stones with the same thickness and the same edge. Our warehouse holds slabs in 2, 3 and 4 cm, polished or honed; other finishes are on request.

Frequently asked questions

Is quartzite the same thing as engineered quartz?
No. Quartzite is a natural stone quarried in blocks and sawn into slabs; engineered quartz is an industrial product of quartz powder and resin. Quartzite tolerates heat, the resin in the composite does not.
Does quartzite stain or etch with acids?
Pure quartzite does not: it is siliceous and does not react with lemon or vinegar. Some varieties sold as quartzite contain limestone and etch like marble, which is why we test the slab before recommending it.
Can I see the real slabs before deciding?
Yes. Marble and quartzite slabs are in stock in Carrara, with photos of each lot online. You can visit the showroom or book a video call and look at them with us, slab by slab.
Why choose marble if quartzite is tougher?
For colour and light: the white of Statuario and Calacatta does not exist in quartzite. And because marble is easily re-polished on site, ages well and comes from our own quarries above Carrara.
What thickness do you suggest for quartzite and marble?
For kitchens 3 cm, with rounded radii in cut-outs for quartzite; for bathrooms and cladding 2 cm. Our warehouse holds slabs in 2, 3 and 4 cm, polished or honed; other finishes on request.

See also

Request a quote

WhatsApp