Marmi di Carrara, since 1956
Get a quote

Guides · Marmi di Carrara · 1956

Marble or engineered quartz for the kitchen countertop?

Updated · By Marmi di Carrara srl

Durability and strength: two different materials

Marble is calcium carbonate, with a Mohs hardness between 3 and 4: it works and polishes well, but a blade or sand under a pot can scratch it. Engineered quartz reaches close to 7 because the grain is quartz, yet the binder is resin, a polymer: the slab is hard on the surface, but what holds it together is plastic. Marble absorbs a little, quartz almost nothing. In daily life quartz scratches less and does not etch; marble asks for a bit more care, but it does not break more easily: at 3 cm a marble top takes decades of normal use.

Care: what really changes

Quartz is cleaned with water and a mild detergent and normally needs no treatment. Marble is cleaned the same way, with a pH-neutral cleaner and a microfibre cloth, but every one or two years a protective product is reapplied to reduce the absorption of oil and wine. It is not a long job: apply, let it work, wipe off the excess. The real point is different: on quartz a mistake leaves no trace, on marble it does. People who live with a marble top learn to wipe lemon and wine straight away, and with a honed finish small marks show far less than on polished.

Heat and scratches: where marble surprises

Here the roles reverse. Marble is a stone: a hot pan set down for a moment does not ruin it, although we still recommend a trivet to avoid thermal shock on a top with cut-outs. The resin in engineered quartz suffers from heat: a very hot pan can leave a dull halo or a slight deformation that never comes out, and the colour can yellow near the hob or in direct sunlight. On scratches quartz wins. On acid etching marble loses: vinegar, lemon and some cleaners leave dull spots, and on a polished surface they show immediately.

Value over time: patina versus uniformity

A quartz top looks the same on day one and in year ten, until it gets marked: a mark on resin cannot be repaired invisibly. A marble top changes: it dulls a little, picks up some marks, and that is what we call patina. The difference is that marble can be re-honed and re-polished on site, bringing it back almost to new even after twenty years. Every slab is also a unique piece of mountain, with veins no other top in the world repeats. In the perceived value of a home a real Calacatta or Statuario top counts more than an imitation, and that shows when the house is sold.

Sustainability: a single material

Marble is one material only: stone cut, honed and installed. It contains no resins or binders, it can be repaired and reused, and at the end of its life it is still stone. Engineered quartz is made in a plant that combines quartz powder, pigments and synthetic resin, and at the end of its life it cannot be separated. We do not want to overstate it: quarrying and transporting marble also has an environmental cost, especially when it travels across the world. That is why distance and supply chain matter: our white marbles come from our own quarries above Carrara and are worked in our own workshops a few kilometres away.

When to choose one or the other

Choose engineered quartz if the kitchen is used very intensively, with children, a lot of cooking and little appetite for care, and if you prefer a uniform surface without veins. Choose marble if you want a real stone, if you like the idea of a top that tells its own story, and if you accept protecting it every one or two years. For an island or a display top marble is almost always the answer; around the hob some clients combine the two materials. Our warehouse holds slabs in 2, 3 and 4 cm, polished or honed; for a kitchen we suggest starting from honed at 3 cm.

Frequently asked questions

Is engineered quartz tougher than marble?
Against scratches and acids, yes: it is harder and does not absorb. Against heat, no: the resin can be marked by a boiling pot, while marble tolerates it. Neither breaks in normal use when thickness and support are right.
Does marble really stain in a kitchen?
It can, with oil, wine, lemon and vinegar left for a long time. A protective treatment every one or two years greatly reduces the risk, and a honed finish hides marks better than polished. An old mark can be removed by re-polishing on site.
Can I see the real slabs before deciding?
Yes. The slabs are in stock in Carrara, with photos of each lot online. You can come and see them in the showroom or book a video call and look at them with us, slab by slab.
Can marble and quartz be combined in the same kitchen?
Yes, several clients do it: quartz around the hob and sink, marble on the island or serving top. They match best when thickness and edge profile are the same.
What thickness and finish do you suggest for a marble kitchen top?
Usually 3 cm with a honed finish. Our warehouse holds slabs in 2, 3 and 4 cm, polished or honed; other finishes are on request.

See also

Request a quote

WhatsApp