Marmi di Carrara, since 1956
Get a quote

Guides · Marmi di Carrara · 1956

Marble or resin for bathrooms and floors?

Updated · By Marmi di Carrara srl

Resistance: cracks, scratches and light

Marble has a Mohs hardness of 3-4 and a slab is solid through its full thickness: a scratch is a mark on the surface, not an opening towards what lies beneath. Resin is a film a few millimetres thick laid over a screed: if the screed moves, the crack comes back through and shows. Epoxy resins tend to yellow under direct light, polyurethane ones less; microcement is more stable but marks and stains because it remains cement-based. Marble, for its part, is porous and acids dull it. No material is invincible: the difference is that stone gets marked but does not wear out.

Maintenance and repairability

Marble wants a pH-neutral cleaner, no descalers, and a protective treatment every one or two years that closes the pores. When wear shows after years, it is re-honed in place and becomes uniform again. Resin cleans easily but cannot be re-honed: a scratched or chipped area is recoated with new product, and the patch, even when well done, stays visible through differences in gloss and colour. Microcement needs periodic sealing with a protective finish, otherwise it absorbs stains. In a bathroom, where limescale and cosmetics work every day, this difference shows within a few years.

Humidity, shower and slip

In the shower tray and on the bathroom floor the issue is not the material but the surface. A smooth resin is slippery when wet, and the versions with anti-slip quartz become rough and hard to clean. Wet polished marble is slippery too: that is why in showers we recommend honed or brushed, which give grip without giving up easy cleaning; these finishes are available on request, while in stock we hold polished and honed. With constant humidity resin can detach where the substrate was not dry; marble laid over correct waterproofing has no such problem, because it is not a bonded film but a solid element.

Value over time: uniqueness versus uniformity

A freshly made resin floor is perfect and identical to itself at every point; after ten years it has micro-scratches, marks and, if exposed, a yellow veil that does not come off. Marble is born with unique veining, different in every slab, and ages with a light patina that honed hides and a re-honing erases. In a house to be sold or let, a bathroom in intact natural stone keeps its value; a tired resin is perceived as something to redo. This is not an aesthetic judgement on resin, which is beautiful in many projects: it is an observation on how the two materials pass through time.

Sustainability: a single material

Resin is a multi-component chemical product; microcement combines cement, polymers and sealers. Marble is stone, cut and honed: one material, no resins, repairable, recovered or crushed as aggregate at the end of its life. The weight of transport is real, especially for those far from Carrara, where we own quarries of Statuario, Calacatta, Bianco Carrara, Bardiglio and Travertino and where we also work the materials we import. We do not want to exaggerate: no building site is zero impact. But a floor that is never redone weighs less, over time, than one that needs touching up now and then.

When to choose one or the other

Choose resin or microcement if you want a monochrome room with no joints, if you must cover an existing floor with a few millimetres, if the works must be quick and light and you accept touch-ups over time. Choose marble if you want a surface that stays, if the shower is used every day, if you love veining and want to be able to remedy the signs of use without redoing everything. A common compromise: bathroom walls in resin and floor, shower tray and vanity top in marble, where water and wear concentrate. Send us the sizes and we will evaluate it with you.

Frequently asked questions

Does resin really crack?
Not on its own: it follows cracks in the screed beneath, because it is a thin film. On a stable substrate it can last well; on a new one or one that moves, the crack resurfaces. A marble slab is solid and does not carry that movement to the surface.
Is marble slippery in a shower?
Polished and wet, yes. That is why in showers we recommend honed or brushed, which give grip without being rough. In stock we hold polished and honed; brushed we make on request.
Which of the two repairs better?
Marble: a mark or dull patch is removed by re-honing in place and the surface becomes uniform again. On resin the repair is almost always visible through a difference in tone and gloss.
Can I see the real slabs before choosing?
Yes. The slabs in our Carrara warehouse are photographed one by one and visible online; you can visit the showroom or book a video call to look at them together with us.
Can I combine resin and marble in the same bathroom?
Yes, and it is a common solution: resin walls for the continuous effect, and floor, shower tray and vanity top in marble, where water resistance and repairability are needed.

See also

Request a quote

WhatsApp