Marmi di Carrara, since 1956
Get a quote

Guides · Marmi di Carrara · 1956

Sealers and protective treatments for marble: a practical guide

Updated · By Marmi di Carrara srl

Penetrating or film-forming

Penetrating protectors go into the pores and fill them without forming a film: they do not change the look and are the usual choice for marble. Film-forming protectors create a surface layer that can alter shine and colour and wear unevenly. Ask your stone mason or the manufacturer which product suits your marble and finish.

What it protects and what not

It protects from oil, coffee, wine and coloured water by slowing absorption. It does not protect from acid etching, scratches or heat: that is why cleaning with neutral detergent and care with spills still count.

How often to redo it

For high-use areas such as main bathrooms and kitchen tops it is recommended to repeat the treatment every 1-2 years; for less stressed areas you can wait longer, checking with the water-drop test.

Better done in the workshop

The ideal treatment is applied to clean dry stone before laying, in the final working stage; on site a second application is made after laying and grouting, following the product's drying time.

Water-drop test and application, step by step

  1. 01Water-drop testPut a drop of water on clean stone. If it beads for several minutes the treatment works; if the stone darkens within a few minutes it needs redoing.
  2. 02Clean thoroughly and let dryWash with neutral detergent, rinse and let it dry completely (even 24 hours): moisture in the stone prevents penetration.
  3. 03Test in a hidden spotApply the product in a barely visible corner and check that colour and shine do not change.
  4. 04Apply the penetrating protectorFollow the manufacturer's instructions: spread evenly with a clean cloth or brush, in small areas, without leaving pools.
  5. 05Remove the excessAfter the time given by the manufacturer wipe off the unabsorbed product with a clean cloth, to avoid rings.
  6. 06Wait for curingAvoid water and liquids for the stated period (usually 24-72 hours) before normal use, and repeat the water-drop test.

Frequently asked questions

How often should the stain-protection treatment on marble be redone?
For high-use areas such as bathrooms and kitchen tops, normally every 1-2 years; a water-drop test shows when.
Does a sealer make marble waterproof?
No: it slows absorption and gives time to wipe up, but it does not protect from acid etching.
Is it applied before or after laying?
Ideally on clean stone before laying, in the final working stage, with a second treatment after laying and grouting.
Does it change the look of marble?
A good penetrating protector should not change it noticeably, but it is wise to test it first in a hidden spot.

See also

Request a quote

WhatsApp