Marmi di Carrara, since 1956
Get a quote

Guides · Marmi di Carrara · 1956

How to clean marble every day

Updated · By Marmi di Carrara srl

Why a neutral detergent

Marble is calcium carbonate, sensitive to acids (vinegar, lemon, many limescale removers) and to strongly alkaline products (bleach, ammonia, strong degreasers). A pH-neutral detergent cleans without attacking the surface or the protective treatment.

What to avoid

Vinegar and lemon (even "natural" ones), limescale removers, bleach, ammonia, aggressive degreasers, abrasive sponges and scouring powders. Also avoid leaving damp objects, perfume bottles or bath products directly on marble: they leave rings or marks.

Good habits

Use coasters, chopping boards and trivets; put trays under perfumes and bath products; wipe cladding dry after showers; vacuum or sweep floors often, because sand scratches.

When more is needed

The protective treatment is normally repeated every 1-2 years on high-use areas such as main bathrooms and kitchen tops. A simple test: if a drop of water darkens the stone within a few minutes, the treatment is spent.

Daily cleaning in four moves

  1. 01Remove dust and crumbsWipe with a dry microfibre cloth or vacuum with a soft nozzle: dust, like sand, scratches when rubbed.
  2. 02Wash with lukewarm water and neutral detergentDilute a few drops of pH-neutral detergent made for marble in lukewarm water and wipe with a well wrung cloth.
  3. 03RinseGo over again with a clean cloth and water to remove every trace of detergent, which otherwise leaves a dull film.
  4. 04Dry at onceDry with a soft microfibre cloth, especially on polished surfaces, to avoid limescale marks.

Frequently asked questions

What do you clean marble with every day?
With a soft microfibre cloth, lukewarm water and a neutral detergent made for marble; then rinse and dry.
Can marble be cleaned with vinegar or lemon?
No: acids etch the surface and leave dull marks. Use only neutral detergents made for natural stone.
Can I use bleach or ammonia?
No: they are too aggressive for marble and can damage the protective treatment too.
How do I know if the protective treatment is spent?
Pour a drop of water: if the stone darkens within a few minutes the treatment needs redoing, normally every 1-2 years on the most used areas.

See also

Request a quote

WhatsApp