Marmi di Carrara · 1956
Marble for outdoors: photos and ideas from our Carrara workshop
Outdoors, marble must withstand rain, frost and sun: it needs low-porosity stones, greater thicknesses (often 3 cm or more for paving) and rough finishes such as bush-hammered, flamed or brushed, which reduce slipperiness. It is used for façades, pool edges, paths, stairs and garden furniture. We review climate and use with you, work from the drawing and ship from Carrara.
Browse outdoor photos with suggested stones, finishes and answers to common questions.
We own the quarries of Statuario, Calacatta, Bianco Carrara, Bardiglio and Travertine; all other materials are imported directly and worked in our own workshops.

Photo 1

Photo 2

Photo 3

Photo 4

Photo 5

Photo 6

Photo 7

Photo 8

Photo 9

Photo 10

Photo 11

Photo 12

Photo 13

Photo 14

Photo 15

Photo 16

Photo 17

Photo 18

Photo 19

Photo 20

Photo 21

Photo 22

Photo 23

Photo 24

Photo 25

Photo 26

Photo 27

Photo 28

Photo 29

Photo 30

Photo 31

Photo 32

Photo 33

Photo 34

Photo 35

Photo 36

Photo 37

Photo 38

Photo 39

Photo 40

Photo 41

Photo 42

Photo 43
Suitable materials
Materials to consider for this use: Bianco Carrara, Botticino Classico, Travertino Romano. These are suggestions, not the material shown in the photo: we choose together on samples and slabs in stock.
Shipping worldwide
We ship worldwide from Carrara. See the pages for the countries we serve: United Kingdom, United States, France, Italy. Timing and documents change from country to country and are set out in the quote.
What people usually look for in outdoor marble
Frequent searches are marble for outdoors, outdoor marble paving, marble pool edge, marble façade cladding, outdoor marble stairs, non-slip outdoor marble, stone garden paving and marble garden furniture. Villa builders also ask for terrace paving. For each we work from the drawing and ship from Carrara.
Frequently asked questions
Does marble stand up outdoors?
Yes, if suitable low-porosity stones and correct laying are chosen. In frost climates check the material and plan drainage and joints.
Which finish for outdoors and pools?
Bush-hammered, flamed or brushed: rougher than polished, they reduce slipperiness when wet.
What thickness for outdoor paving?
Often 3 cm or more, depending on substrate and traffic; for façades it depends on the fixing system.
Which stones for pool edges?
Light, low-porosity stones that heat less in the sun, with non-slip finish and rounded edges. We help you choose for climate and water.
How do I clean outdoor marble?
Water and a soft brush or neutral cleaners; avoid acids. A protective treatment reduces stains and algae.
Do you also make garden furniture?
Yes: tables, benches, fountains, planters and basins are made to measure for outdoors.
How do I get a quote?
Use the request form with drawing or measurements, stone, finish, local climate and delivery country. We reply with a proposal, 3D design included if needed.
