Marmi di Carrara, since 1956
Get a quote

Marble products

Marble exterior cladding

External stone claddings cover walls, plinths and skirtings of buildings, with slabs bonded or mechanically fixed. They are chosen to protect the masonry and give the building a prestigious appearance.

Request a quote

How to choose

Thicknesses of 1.5 to 3 cm are normally used, with thinner slabs only for low heights. Outdoors, frost resistance and low porosity count; a flamed, bush-hammered or brushed finish is less slippery and hides marks better. Light colours require more cleaning in the city.

Fabrication and installation

The slabs are laid with good-quality adhesives and, for significant heights, with mechanical anchors. The joints are sized to absorb expansion and sealed with products compatible with the stone.

Care and maintenance

Periodic washing with water and a soft brush, without acids. A water-repellent protection helps against smog and rain.

Materials for exterior cladding

Frequently asked questions

Is it better to bond or to fix mechanically?
For small surfaces adhesive is enough, while at height or on exposed walls anchors are used. The choice depends on the project and on local regulations.
What happens with frost?
Water that penetrates the stone and freezes can cause detachment. This is why, in cold climates, low-porosity material is chosen and water run-off is taken care of.

From the quarry to your project

Request a quote

Sizes, photos or a drawing: we reply within one working day with photos of the available slabs.

WhatsApp