Marble products
Marble ventilated facades
The ventilated facade is an external cladding of stone slabs fixed to a structure, with an air cavity between the stone and the wall. It is chosen for new or refurbished buildings where weather protection and insulation are wanted.
Request a quoteHow to choose
The slabs are normally around 2-3 cm thick, depending on the format and the fixing system. Outdoors, stones resistant to frost and thermal shock must be chosen, verified by laboratory tests; not all marbles are suitable. Matt or brushed finishes age better than polished ones.
Fabrication and installation
The slabs are cut precisely and prepared with holes or edge slots for the stainless steel anchors, calculated by a designer. Open or sealed joints are left between the panels, according to the system, for expansion and ventilation.
Care and maintenance
A periodic check of anchors and joints is useful, with light washing to remove dust and smog. Pressure washers at too high a pressure should be avoided.
Materials for ventilated facades

Arabescato
marble

Arabescato Alpino
marble white

Arabescato Cervaiole
marble white

Arabescato Corchia
marble

Arabescato Orobico Rosso
marble red

Arabescato Vagli
marble white

Azul Bahia
granite blue

Azul Macaúbas
quartzite blue

Bardiglio
marble grey

Bardiglio Imperiale
marble grey

Bardiglio Nuvolato
marble grey

Bianco Carrara
marble white

Bianco Carrara C
marble white

Bianco Carrara C Extra
marble white

Bianco Carrara CD
marble white

Bianco Carrara S Extra
marble white

Bianco Carrara Venato
marble white

Bianco Gioia
marble white

Bianco Statuario Classico
marble white

Calacatta Atlantico
marble white

Calacatta Borghini
marble white

Calacatta Carrara
marble white

Calacatta Gold
marble white

Calacatta Gold Vein
marble white
Frequently asked questions
- Does marble stand up to outdoor use on a facade?
- It depends on the stone: some are suitable, others suffer from frost and pollution. This is why materials with certifications and frost-resistance tests are chosen.
- Who calculates the anchors?
- The calculation is the responsibility of the facade designer, based on wind, weight and wall type. The workshop prepares the slabs according to that design.
From the quarry to your project
Request a quote
Sizes, photos or a drawing: we reply within one working day with photos of the available slabs.
