Marmi di Carrara, since 1956
Get a quote

marble wall cladding · Carrara · 1956

Marble wall cladding: idea 50 from the Marmi di Carrara archive

Marble wall cladding: idea 50, lift linings · Marmi di Carrara

In short

Marble wall cladding from the Carrara workshop. This photo (horizontal shot) shows the kind of work we can prepare from your drawings, with materials chosen together and shipments within Italy and abroad.

Typical applications: lift linings, headboards and panelling and reception backdrops. Interior walls need only 1-2 cm; thin or lightweight panels reduce weight and loads; large slabs call for studied fixings and joints. Polished, honed or satin; the veining can be book-matched for a symmetrical pattern on the wall.

Space
marble wall cladding
Applications
interior walls, entrances and lobbies, lift linings, shower walls
Typical thickness
Interior walls need only 1-2 cm; thin or lightweight panels reduce weight and loads; large slabs call for studied fixings and joints.
Finishes
Polished, honed or satin; the veining can be book-matched for a symmetrical pattern on the wall.
Care
A soft, barely damp cloth is enough; avoid acidic products. Wear on walls is low, but splashes of water and soap should be dried in wet areas.
Suggested materials
Statuario, Arabescato, Onice Ambra
Size
1920 × 1072 px
Photo
Marmi di Carrara srl

Suitable materials

Materials to consider for this use: Statuario, Arabescato, Onice Ambra. These are suggestions, not the material shown in the photo: we choose together on samples and slabs in stock.

Slabs in stockAll materials

Related products

Where it is used

Shipping worldwide

We ship worldwide from Carrara. See the pages for the countries we serve: Germany, France, Italy, Saudi Arabia. Timing and documents change from country to country and are set out in the quote.

Our own quarries and workshops. We own the quarries of Statuario, Calacatta, Bianco Carrara, Bardiglio and Travertine; all other materials are imported directly and worked in our own workshops.

Frequently asked questions

Marble wall cladding: what thickness is needed?

Interior walls need only 1-2 cm; thin or lightweight panels reduce weight and loads; large slabs call for studied fixings and joints.

Marble wall cladding: how do you clean and maintain it?

A soft, barely damp cloth is enough; avoid acidic products. Wear on walls is low, but splashes of water and soap should be dried in wet areas.

Marble wall cladding: can it be made to measure like the photo?

Yes, we work from drawings and measurements: sizes, edges, holes and cut-outs. You can start from a sketch or a photo and use our design tools before the quote.

Marble wall cladding: which finishes are chosen?

Polished, honed or satin; the veining can be book-matched for a symmetrical pattern on the wall. Before ordering we can show you samples and slabs.

Design this space

Try the space with our tools: choose marble, edges and sizes, or start from your own photo. Then ask us for a quote.

Like this project? Send us a sketch or drawing for a piece list and a quote.

Send your drawing →

More photos of the same space

All photos · marble wall cladding

More ideas

Also search

  • Calacatta Oro marble for wall cladding
  • Statuario marble wall cladding
  • marble fireplaces
  • marble mosaics
  • marble shower walls
  • onyx mosaics
  • marble for entrance hall
  • marble for hotel
WhatsApp