marble quarries and rough blocks · Carrara · 1956
Marble quarry or rough blocks · photo 4 from our archive

In short
Marble quarry or rough blocks: looking for ideas? Here is a photo (horizontal shot) with suitable materials, common finishes and advice from people who have worked stone in Carrara since 1956.
What to ask at design stage: block extraction, squared blocks, choosing the block at the quarry. Slabs of 2-3 cm and more are cut from a quarry block: thickness and yield depend on the block’s fractures and veining. A raw block is not treated: care starts with the slabs, with neutral detergent and a sealer once the material is installed.
- Space
- marble quarry or rough blocks
- Applications
- block extraction, quarry faces and benches, quarry yards, squared blocks
- Typical thickness
- Slabs of 2-3 cm and more are cut from a quarry block: thickness and yield depend on the block’s fractures and veining.
- Finishes
- The block is raw or squared; the finish, polished, honed or brushed, is chosen only after sawing and working.
- Care
- A raw block is not treated: care starts with the slabs, with neutral detergent and a sealer once the material is installed.
- Suggested materials
- Calacatta Oro, Arabescato, Bardiglio
- Size
- 1920 × 1441 px
- Photo
- Marmi di Carrara srl
Suitable materials
Materials to consider for this use: Calacatta Oro, Arabescato, Bardiglio. These are suggestions, not the material shown in the photo: we choose together on samples and slabs in stock.
Related products
Where it is used
Shipping worldwide
We ship worldwide from Carrara. See the pages for the countries we serve: Germany, France, Italy, Saudi Arabia. Timing and documents change from country to country and are set out in the quote.
Our own quarries and workshops. We own the quarries of Statuario, Calacatta, Bianco Carrara, Bardiglio and Travertine; all other materials are imported directly and worked in our own workshops.
Frequently asked questions
Marble quarry or rough blocks: how much does it cost?
There is no single price: it depends on material, thickness, finish and processing (edges, holes, cut-outs). The Prices page shows indicative figures for the materials that have them; for your project we prepare a written quote.
Marble quarry or rough blocks: what thickness is needed?
Slabs of 2-3 cm and more are cut from a quarry block: thickness and yield depend on the block’s fractures and veining.
Marble quarry or rough blocks: can it be made to measure like the photo?
Yes, we work from drawings and measurements: sizes, edges, holes and cut-outs. You can start from a sketch or a photo and use our design tools before the quote.
Marble quarry or rough blocks: how do you clean and maintain it?
A raw block is not treated: care starts with the slabs, with neutral detergent and a sealer once the material is installed.
Design this space
Try the space with our tools: choose marble, edges and sizes, or start from your own photo. Then ask us for a quote.
Like this project? Send us a sketch or drawing for a piece list and a quote.
Send your drawing →More photos of the same space
More ideas

stone exteriors and façades

solid stone pieces and monoliths

custom marble fabrication

marble interiors







