marble quarries and rough blocks · Carrara · 1956
The Foundation of Quality: Selecting and Caring for Raw Stone Blocks

In short
The journey of every bespoke stone project begins at the quarry face. Selecting a raw block requires a deep understanding of natural veining and structural integrity. At Marmi di Carrara, active since 1956, we oversee the extraction and squaring of blocks to ensure the highest yield for our international clients. While a raw block remains in its natural state, the care and maintenance of the final surface begin with the selection of healthy, sound material that will eventually be sawn into slabs and finished to your specific requirements.
What to ask at design stage: squared blocks, block extraction, quarry faces and benches. Slabs of 2-3 cm and more are cut from a quarry block: thickness and yield depend on the block’s fractures and veining. A raw block is not treated: care starts with the slabs, with neutral detergent and a sealer once the material is installed.
- Space
- Marble quarry and block yard
- Applications
- Block extraction, squaring, and selection
- Thickness
- Variable; slabs of 2-3 cm or more are cut based on block yield
- Finishes
- Raw or squared; final finish applied after sawing
- Care
- Neutral detergent and sealer recommended after installation
- Size
- 1920 × 1407 px
- Photo
- Marmi di Carrara srl
Suitable materials
Materials to consider for this use: Bianco Carrara, Calacatta Oro, Arabescato. These are suggestions, not the material shown in the photo: we choose together on samples and slabs in stock.
Related products
Where it is used
Shipping worldwide
We ship worldwide from Carrara. See the pages for the countries we serve: France, Switzerland, United Arab Emirates, United Kingdom. Timing and documents change from country to country and are set out in the quote.
Our own quarries and workshops. We own the quarries of Statuario, Calacatta, Bianco Carrara, Bardiglio and Travertine; all other materials are imported directly and worked in our own workshops.
Frequently asked questions
How is the thickness of a slab determined from a block?
Slabs are typically cut to 2 cm or 3 cm, but the final thickness and yield depend entirely on the block's natural fractures and the specific requirements of the project.
Does a raw block require immediate treatment?
No, a raw block is not treated at the quarry. Protective care, such as applying a sealer, only begins once the material has been worked into slabs and installed in its final environment.
Can I choose the finish of the stone at the quarry?
The block is viewed in its raw or squared state. The final finish—whether polished, honed, or brushed—is only applied after the block has been sawn into slabs in our workshops.
Design this space
Try the space with our tools: choose marble, edges and sizes, or start from your own photo. Then ask us for a quote.
Like this project? Send us a sketch or drawing for a piece list and a quote.
Send your drawing →










