Marmi di Carrara, since 1956
Get a quote

Marble products

Marble tiles

Marble tiles are regular-format pieces cut from slabs and calibrated, intended for floors and walls throughout the home. They are chosen when a uniform surface is needed, laid in series and ordered in large quantities where required.

Request a quote

How to choose

The usual thickness is normally 1-2 cm for walls and 1.5-2 cm for floors, with formats ranging from small squares to large-cut rectangles. A polished finish brings out the pattern but is more slippery when wet; honed or brushed is better suited to entrances and high-traffic areas. It is advisable to order all the material from the same batch, since tonal variations between different lots are normal.

Fabrication and installation

Tiles are produced by cutting slabs, then calibrated, squared and finished on the visible face. They are laid with an adhesive suitable for light-coloured stone to avoid staining, with thin, even joints.

Care and maintenance

After installation the surface should be treated with a suitable sealer and cleaned with neutral detergents. Avoid acidic or abrasive products, which dull the marble.

Materials for tiles

Frequently asked questions

Can I lay marble tiles over underfloor heating?
Yes, stone conducts heat well and is a frequent choice. Flexible adhesives are needed, however, along with the system start-up times indicated by the installer.
Why are tiles of the same variety not all identical?
Marble is a natural material and veining and tones change from block to block, and even within the same slab. This is why we recommend inspecting the pieces before laying and mixing them with care.

From the quarry to your project

Request a quote

Sizes, photos or a drawing: we reply within one working day with photos of the available slabs.

WhatsApp