marble wall cladding · Carrara · 1956
Marble wall cladding: idea 54 from the Marmi di Carrara archive

In short
Marble wall cladding from the Carrara workshop. This photo (horizontal shot) shows the kind of work we can prepare from your drawings, with materials chosen together and shipments within Italy and abroad.
Details to settle in the project: headboards and panelling and interior walls, as well as entrances and lobbies. Polished, honed or satin; the veining can be book-matched for a symmetrical pattern on the wall. Interior walls need only 1-2 cm; thin or lightweight panels reduce weight and loads; large slabs call for studied fixings and joints.
- Space
- marble wall cladding
- Applications
- interior walls, entrances and lobbies, lift linings, shower walls
- Typical thickness
- Interior walls need only 1-2 cm; thin or lightweight panels reduce weight and loads; large slabs call for studied fixings and joints.
- Finishes
- Polished, honed or satin; the veining can be book-matched for a symmetrical pattern on the wall.
- Care
- A soft, barely damp cloth is enough; avoid acidic products. Wear on walls is low, but splashes of water and soap should be dried in wet areas.
- Suggested materials
- Statuario, Arabescato, Onice Ambra
- Size
- 1500 × 1125 px
- Photo
- Marmi di Carrara srl
Suitable materials
Materials to consider for this use: Statuario, Arabescato, Onice Ambra. These are suggestions, not the material shown in the photo: we choose together on samples and slabs in stock.
Related products
Where it is used
Shipping worldwide
We ship worldwide from Carrara. See the pages for the countries we serve: Saudi Arabia, United Kingdom, Germany, Switzerland. Timing and documents change from country to country and are set out in the quote.
- Wall cladding · Saudi Arabia
- Wall cladding · United Kingdom
- Wall cladding · Germany
- Wall cladding · Switzerland
Our own quarries and workshops. We own the quarries of Statuario, Calacatta, Bianco Carrara, Bardiglio and Travertine; all other materials are imported directly and worked in our own workshops.
Frequently asked questions
Marble wall cladding: can it be made to measure like the photo?
Yes, we work from drawings and measurements: sizes, edges, holes and cut-outs. You can start from a sketch or a photo and use our design tools before the quote.
Marble wall cladding: which finishes are chosen?
Polished, honed or satin; the veining can be book-matched for a symmetrical pattern on the wall. Before ordering we can show you samples and slabs.
Marble wall cladding: what thickness is needed?
Interior walls need only 1-2 cm; thin or lightweight panels reduce weight and loads; large slabs call for studied fixings and joints.
Marble wall cladding: how do you clean and maintain it?
A soft, barely damp cloth is enough; avoid acidic products. Wear on walls is low, but splashes of water and soap should be dried in wet areas.
Design this space
Try the space with our tools: choose marble, edges and sizes, or start from your own photo. Then ask us for a quote.
Like this project? Send us a sketch or drawing for a piece list and a quote.
Send your drawing →More photos of the same space
More ideas

marble staircases

backlit onyx and light panels

marble tables and furniture

marble sculptures and artworks
Also search
- marble wall cladding · Saudi Arabia
- marble wall cladding · United Kingdom
- marble wall cladding · Germany
- marble wall cladding · Switzerland
- onyx mosaics
- marble for entrance hall
- marble for hotel
- onyx for entrance hall
- onyx for hotel
- Arabescato marble for fireplaces
- Arabescato marble for shower walls
- Bianco Carrara marble for fireplaces






