marble bathrooms · Carrara · 1956
Idea 131: custom marble bathroom

In short
Marble bathroom: looking for ideas? Here is a photo (vertical shot) with suitable materials, common finishes and advice from people who have worked stone in Carrara since 1956.
Typical applications: floors, niches and shelves and wall cladding. Walls usually need 1-2 cm; vanity tops, basins and shower trays use 2-3 cm, and tubs or carved pieces need thicker stock. Polished for a bright look, honed for a quieter matte one, brushed or satin to reduce marks and slipperiness; in showers a less smooth finish is wiser.
- Space
- marble bathroom
- Applications
- wall cladding, vanity tops and basins, shower trays, floors
- Typical thickness
- Walls usually need 1-2 cm; vanity tops, basins and shower trays use 2-3 cm, and tubs or carved pieces need thicker stock.
- Finishes
- Polished for a bright look, honed for a quieter matte one, brushed or satin to reduce marks and slipperiness; in showers a less smooth finish is wiser.
- Care
- Clean with water and neutral soap, avoid acids, harsh limescale removers and abrasive sponges; a periodic water-repellent sealer protects against stains and damp.
- Suggested materials
- Calacatta Oro, Bianco Carrara, Arabescato
- Size
- 1440 × 1920 px
- Photo
- Marmi di Carrara srl
Suitable materials
Materials to consider for this use: Calacatta Oro, Bianco Carrara, Arabescato. These are suggestions, not the material shown in the photo: we choose together on samples and slabs in stock.
Related products
Where it is used
Shipping worldwide
We ship worldwide from Carrara. See the pages for the countries we serve: Germany, France, Italy, Saudi Arabia. Timing and documents change from country to country and are set out in the quote.
Our own quarries and workshops. We own the quarries of Statuario, Calacatta, Bianco Carrara, Bardiglio and Travertine; all other materials are imported directly and worked in our own workshops.
Frequently asked questions
Marble bathroom: which marble should I choose?
It depends on use and taste. For this kind of work start from Calacatta Oro, Bianco Carrara, Arabescato: these are examples, to be confirmed on real samples and slabs. We own the quarries of Statuario, Calacatta, Bianco Carrara, Bardiglio and Travertine; all other materials are imported directly and worked in our own workshops.
Marble bathroom: can it be made to measure like the photo?
Yes, we work from drawings and measurements: sizes, edges, holes and cut-outs. You can start from a sketch or a photo and use our design tools before the quote.
Marble bathroom: what thickness is needed?
Walls usually need 1-2 cm; vanity tops, basins and shower trays use 2-3 cm, and tubs or carved pieces need thicker stock.
Marble bathroom: how is it installed?
We supply pieces to measure with fixing drawings; installation should go to an experienced stone fitter in your country. For floors and niches and shelves it pays to settle fixings and joints at drawing stage.
Design this space
Try the space with our tools: choose marble, edges and sizes, or start from your own photo. Then ask us for a quote.
Like this project? Send us a sketch or drawing for a piece list and a quote.
Send your drawing →More photos of the same space
More ideas

stone exteriors and façades

solid stone pieces and monoliths

custom marble fabrication

marble quarries and rough blocks
Also search
- marble bathrooms · Germany
- marble bathrooms · France
- marble bathrooms · Italy
- marble bathrooms · Saudi Arabia
- 3 cm marble bathroom vanity tops
- Italian marble bathroom vanity tops Australia
- Italian marble bathroom vanity tops Canada
- Italian marble bathroom vanity tops China
- marble bathroom vanity tops
- travertine bathroom vanity tops
- Arabescato marble for bathroom vanity tops
- Bardiglio marble for bathroom vanity tops








