Marmi di Carrara, since 1956
Get a quote

Marble products

Marble shower trays

A marble shower tray is a walkable surface with a fall towards the drain, made in a single piece or from slabs. It is chosen for high-quality showers, flush with the floor or raised.

Request a quote

How to choose

The thickness is normally 2-3 cm, with a linear or central drain. In the shower a non-slip finish is required, such as brushed or grooved, because wet polished marble is slippery. The material must be low in absorption and well protected against water and soap.

Fabrication and installation

The tray is cut with a fall and a drain hole or channel, and the edges are finished. Installation requires careful waterproofing of the substrate and sealing of the joints.

Care and maintenance

Dry after showering and clean with neutral products; avoid acidic limescale removers. A periodic protective treatment limits soap marks.

Materials for shower trays

Frequently asked questions

Is a marble shower tray slippery?
With a polished finish yes, which is why a non-slip finish is chosen. A brushed or grooved surface gives more safety.
Can the tray be made flush with the floor?
Yes, by creating a fall in the screed or using a tray with a linear drain. It requires careful design from the outset.

From the quarry to your project

Request a quote

Sizes, photos or a drawing: we reply within one working day with photos of the available slabs.

WhatsApp