marble bathrooms · Carrara · 1956
Marble bathroom · photo 25 from our archive

In short
Marble bathroom: looking for ideas? Here is a photo (horizontal shot) with suitable materials, common finishes and advice from people who have worked stone in Carrara since 1956.
Details to settle in the project: shower lining and vanity tops and basins, as well as shower trays. Polished for a bright look, honed for a quieter matte one, brushed or satin to reduce marks and slipperiness; in showers a less smooth finish is wiser. Walls usually need 1-2 cm; vanity tops, basins and shower trays use 2-3 cm, and tubs or carved pieces need thicker stock.
- Space
- marble bathroom
- Applications
- wall cladding, vanity tops and basins, shower trays, floors
- Typical thickness
- Walls usually need 1-2 cm; vanity tops, basins and shower trays use 2-3 cm, and tubs or carved pieces need thicker stock.
- Finishes
- Polished for a bright look, honed for a quieter matte one, brushed or satin to reduce marks and slipperiness; in showers a less smooth finish is wiser.
- Care
- Clean with water and neutral soap, avoid acids, harsh limescale removers and abrasive sponges; a periodic water-repellent sealer protects against stains and damp.
- Suggested materials
- Calacatta Oro, Bianco Carrara, Arabescato
- Size
- 1600 × 1200 px
- Photo
- Marmi di Carrara srl
Suitable materials
Materials to consider for this use: Calacatta Oro, Bianco Carrara, Arabescato. These are suggestions, not the material shown in the photo: we choose together on samples and slabs in stock.
Related products
Where it is used
Shipping worldwide
We ship worldwide from Carrara. See the pages for the countries we serve: France, Switzerland, United Arab Emirates, United Kingdom. Timing and documents change from country to country and are set out in the quote.
Our own quarries and workshops. We own the quarries of Statuario, Calacatta, Bianco Carrara, Bardiglio and Travertine; all other materials are imported directly and worked in our own workshops.
Frequently asked questions
Marble bathroom: what thickness is needed?
Walls usually need 1-2 cm; vanity tops, basins and shower trays use 2-3 cm, and tubs or carved pieces need thicker stock.
Marble bathroom: how is it installed?
We supply pieces to measure with fixing drawings; installation should go to an experienced stone fitter in your country. For shower lining and vanity tops and basins it pays to settle fixings and joints at drawing stage.
Marble bathroom: which marble should I choose?
It depends on use and taste. For this kind of work start from Calacatta Oro, Bianco Carrara, Arabescato: these are examples, to be confirmed on real samples and slabs. We own the quarries of Statuario, Calacatta, Bianco Carrara, Bardiglio and Travertine; all other materials are imported directly and worked in our own workshops.
Marble bathroom: how much does it cost?
There is no single price: it depends on material, thickness, finish and processing (edges, holes, cut-outs). The Prices page shows indicative figures for the materials that have them; for your project we prepare a written quote.
Design this space
Try the space with our tools: choose marble, edges and sizes, or start from your own photo. Then ask us for a quote.
Like this project? Send us a sketch or drawing for a piece list and a quote.
Send your drawing →More photos of the same space
More ideas

lightweight honeycomb marble panels

marble staircases

marble inlays and artistic floors

marble tables and furniture
Also search
- marble bathrooms · France
- marble bathrooms · Switzerland
- marble bathrooms · United Arab Emirates
- marble bathrooms · United Kingdom
- marble washbasins
- travertine for bathtubs
- travertine shower walls
- travertine washbasins
- marble bathroom
- marble for spa and hammam
- travertine bathroom
- travertine for spa and hammam








