marble bathrooms · Carrara · 1956
Marble bathroom: idea 21 from the Marmi di Carrara archive

In short
Marble bathroom: looking for ideas? Here is a photo (horizontal shot) with suitable materials, common finishes and advice from people who have worked stone in Carrara since 1956.
Details to settle in the project: vanity tops and basins and shower trays, as well as niches and shelves. Polished for a bright look, honed for a quieter matte one, brushed or satin to reduce marks and slipperiness; in showers a less smooth finish is wiser. Walls usually need 1-2 cm; vanity tops, basins and shower trays use 2-3 cm, and tubs or carved pieces need thicker stock.
- Space
- marble bathroom
- Applications
- wall cladding, vanity tops and basins, shower trays, floors
- Typical thickness
- Walls usually need 1-2 cm; vanity tops, basins and shower trays use 2-3 cm, and tubs or carved pieces need thicker stock.
- Finishes
- Polished for a bright look, honed for a quieter matte one, brushed or satin to reduce marks and slipperiness; in showers a less smooth finish is wiser.
- Care
- Clean with water and neutral soap, avoid acids, harsh limescale removers and abrasive sponges; a periodic water-repellent sealer protects against stains and damp.
- Suggested materials
- Arabescato, Bardiglio, Statuario
- Size
- 1200 × 799 px
- Photo
- Marmi di Carrara srl
Suitable materials
Materials to consider for this use: Arabescato, Bardiglio, Statuario. These are suggestions, not the material shown in the photo: we choose together on samples and slabs in stock.
Related products
Where it is used
Shipping worldwide
We ship worldwide from Carrara. See the pages for the countries we serve: United States, Germany, Switzerland, United Arab Emirates. Timing and documents change from country to country and are set out in the quote.
Our own quarries and workshops. We own the quarries of Statuario, Calacatta, Bianco Carrara, Bardiglio and Travertine; all other materials are imported directly and worked in our own workshops.
Frequently asked questions
Marble bathroom: which finishes are chosen?
Polished for a bright look, honed for a quieter matte one, brushed or satin to reduce marks and slipperiness; in showers a less smooth finish is wiser. Before ordering we can show you samples and slabs.
Marble bathroom: what thickness is needed?
Walls usually need 1-2 cm; vanity tops, basins and shower trays use 2-3 cm, and tubs or carved pieces need thicker stock.
Marble bathroom: can it be made to measure like the photo?
Yes, we work from drawings and measurements: sizes, edges, holes and cut-outs. You can start from a sketch or a photo and use our design tools before the quote.
Marble bathroom: how is it installed?
We supply pieces to measure with fixing drawings; installation should go to an experienced stone fitter in your country. For vanity tops and basins and shower trays it pays to settle fixings and joints at drawing stage.
Design this space
Try the space with our tools: choose marble, edges and sizes, or start from your own photo. Then ask us for a quote.
Like this project? Send us a sketch or drawing for a piece list and a quote.
Send your drawing →More photos of the same space
More ideas

marble wall cladding

marble work for yachts and marine

stone exteriors and façades

solid stone pieces and monoliths
Also search
- marble bathrooms · United States
- marble bathrooms · Germany
- marble bathrooms · Switzerland
- marble bathrooms · United Arab Emirates
- Italian marble bathroom vanity tops Australia
- Italian marble bathroom vanity tops Canada
- Italian marble bathroom vanity tops China
- marble bathroom vanity tops
- travertine bathroom vanity tops
- Arabescato marble for bathroom vanity tops
- Bardiglio marble for bathroom vanity tops
- Bianco Carrara marble for bathroom vanity tops








