Statuario for wall cladding: slabs and bundles in stock in Carrara
In the Carrara warehouse Statuario is present with 16 bundles that suit wall cladding: 667 slabs, 3,061 m², thickness 2 and 3 cm and finish polished. The average slab of MDC-01 measures about 2.70 × 1.64 m, and the bundle counts 55 slabs. From our own quarries.
Apuan white marble with a pure white ground and bold, sparse grey veins: the most prized of the Carrara marbles, chosen on the block for bathrooms, stairs and statement pieces.
Why Statuario for wall cladding
Marble is a metamorphic limestone rock: it works well, takes a polish and has unique veining, but it reacts to acids (lemon, vinegar, some cleaners) that can dull the polished surface.
To clad a wall, 2 cm slabs are cut to size, also book-matched for a symmetrical pattern.
A stone of white tone gives light and breadth to a space; next to dark woods or metals it makes a sharp contrast, next to neutral tones a quiet whole.
Thickness, weight and workmanship
In stock: thickness 2 and 3 cm. 2 cm ≈ 54 kg/m²; 3 cm ≈ 81 kg/m².
Indicative values for Statuario from the data sheet: density 2,710 kg/m³, water absorption 0.09%, compressive strength 91.6 MPa and flexural strength 15.9 MPa.
Consecutive slabs give book-matched panels, trimmed flush and mitred at 45° for the corners.
Indicative yield of the largest bundle: about 214 m² of wall, after a 12% allowance for waste.
Laying and care
Wall laying uses an adhesive suited to the weight and the stone; large slabs are also fixed with mechanical anchors and sealed joints.
Of these bundles 6 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.
We also hold 16 blocks of Statuario in stock: for a large project the block can be chosen and sawn to size.
Shipping and packing from Carrara
Open the bundle page, check the photo and size of every slab and send the request with the MDC number: we reply with availability and terms.
Bundles available

Statuario MDC-01
55 slabs, 2 cm, polished, 2.70 × 1.64 m, yield ≈ 214 m² of wall

Statuario MDC-111
53 slabs, 2 cm, polished, 2.70 × 1.67 m, yield ≈ 210 m² of wall

Statuario MDC-278
52 slabs, 2 cm, polished, 2.80 × 1.63 m, yield ≈ 209 m² of wall

Statuario MDC-277
49 slabs, 2 cm, polished, 2.80 × 1.75 m, yield ≈ 212 m² of wall

Statuario MDC-109
48 slabs, 2 cm, polished, 2.76 × 1.73 m, yield ≈ 201 m² of wall

Statuario MDC-276
46 slabs, 2 cm, polished, 2.82 × 1.67 m, yield ≈ 191 m² of wall

Statuario MDC-108
45 slabs, 2 cm, polished, 2.59 × 1.63 m, yield ≈ 167 m² of wall

Statuario MDC-275
44 slabs, 2 cm, polished, 2.67 × 1.73 m, yield ≈ 180 m² of wall

Statuario MDC-107
43 slabs, 2 cm, polished, 2.77 × 1.69 m, yield ≈ 177 m² of wall

Statuario MDC-114
41 slabs, 2 cm, polished, 2.70 × 1.72 m, yield ≈ 168 m² of wall

Statuario MDC-106
40 slabs, 2 cm, polished, 2.76 × 1.65 m, yield ≈ 160 m² of wall

Statuario MDC-113
39 slabs, 2 cm, polished, 2.66 × 1.75 m, yield ≈ 160 m² of wall

Statuario MDC-12
37 slabs, 2 cm, polished, 2.61 × 1.62 m, yield ≈ 138 m² of wall

Statuario MDC-112
36 slabs, 2 cm, polished, 2.59 × 1.72 m, yield ≈ 141 m² of wall

Statuario MDC-110
28 slabs, 2 cm, polished, 2.82 × 1.71 m, yield ≈ 119 m² of wall

Statuario MDC-310
11 slabs, 3 cm, polished, 2.83 × 1.64 m, yield ≈ 45 m² of wall
Frequently asked questions
What thickness should I choose for wall cladding in Statuario?
For wall cladding 2 cm is enough; 3 cm is used for very large slabs or mechanical fixing. In stock: thickness 2 and 3 cm.
Is Statuario suitable for wall cladding?
Statuario works for wall cladding, as long as the right thickness (2 and 3 cm) and finish (polished) are chosen. Marble is a metamorphic limestone rock: it works well, takes a polish and has unique veining, but it reacts to acids (lemon, vinegar, some cleaners) that can dull the polished surface.
How much Statuario do you have now for wall cladding?
Today in the Carrara warehouse: 16 bundles, 667 slabs, 3,061 m²; finish polished. Bundle MDC-01 has 55 slabs of about 2.70 × 1.64 m.
Do you ship Statuario outside Italy?
The warehouse is in Carrara, close to the ports of La Spezia and Genoa: containers leave from here for overseas and trucks for Europe, with packing and loading handled by our own staff.
How is Statuario cladding fixed?
With adhesive suited to the weight or mechanical anchors for large slabs, on a flat, dry substrate. For daily cleaning water and a pH-neutral detergent are enough; avoid acids, descalers and abrasive sponges, which dull polished marble.
