Marmi di Carrara, since 1956
Get a quote

Inventory · Statuario

Statuario for vanity tops: slabs and bundles in stock in Carrara

Statuario for vanity tops: the warehouse holds 16 bundles with thickness 2 and 3 cm, in all 667 slabs and 3,061 m², finish polished. Bundle MDC-01 (55 slabs, 2.70 × 1.64 m) is the one to start from when you need a lot of material with the same veining. From our own quarries.

Apuan white marble with a pure white ground and bold, sparse grey veins: the most prized of the Carrara marbles, chosen on the block for bathrooms, stairs and statement pieces.

Why Statuario for vanity tops

Marble is a metamorphic limestone rock: it works well, takes a polish and has unique veining, but it reacts to acids (lemon, vinegar, some cleaners) that can dull the polished surface.

A vanity top is a small but very visible piece: it is cut from a well-chosen slab, with a cut-out for the basin and a drip edge on the front.

On a marble vanity top perfumes, dyes and toothpaste can leave marks: a sealer and a honed finish help.

The light tone (white) reflects light and brightens rooms, but it shows stains and marks: the choice of finish matters more than with dark tones.

Thickness, weight and workmanship

In stock: thickness 2 and 3 cm. 2 cm ≈ 54 kg/m²; 3 cm ≈ 81 kg/m².

Indicative values for Statuario from the data sheet: density 2,710 kg/m³, water absorption 0.09%, compressive strength 91.6 MPa and flexural strength 15.9 MPa.

Tops are made with an integrated basin carved from solid or with a drop-in bowl.

Indicative yield: each slab (2.70 × 1.64 m) gives about 6 tops of 120 × 50 cm, about 330 in the largest bundle.

Laying and care

Silicone goes on the joints with the wall and around the basin; the upstand is glued to the wall.

Of these bundles 6 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.

We also hold 16 blocks of Statuario in stock: for a large project the block can be chosen and sawn to size.

Shipping and packing from Carrara

To ask for Statuario, give the MDC number of the bundle you like (for example MDC-01) and use the guided quote: price is on request.

Bundles available

Frequently asked questions

What thickness should I choose for vanity tops in Statuario?

For a vanity top 2 or 3 cm is fine; at 2 cm the front edge is doubled. In stock: thickness 2 and 3 cm.

Is Statuario suitable for vanity tops?

Yes, Statuario (marble) is worked for vanity tops in our workshop. Marble is a metamorphic limestone rock: it works well, takes a polish and has unique veining, but it reacts to acids (lemon, vinegar, some cleaners) that can dull the polished surface.

How much Statuario do you have now for vanity tops?

Right now 16 bundles that fit, with 667 slabs (3,061 m²) and thickness 2 and 3 cm; MDC-01 is the largest (55 slabs, 2.70 × 1.64 m).

Do you ship Statuario outside Italy?

Before shipping we photograph the bundle and prepare a slab-by-slab list with numbers and sizes; the type of packing (A-frames or crates) depends on destination and vehicle.

How do I protect a vanity top in Statuario?

With a water-based sealer after laying and a soft cloth to dry it. A protective treatment repeated now and then repels oil and wine; marked marble can be re-polished in the workshop.

WhatsApp