Marmi di Carrara, since 1956
Get a quote

Inventory · Statuario

Statuario for floors: slabs and bundles in stock in Carrara

For floors we now hold 16 bundles of Statuario in the Carrara warehouse: 667 slabs totalling 3,061 m², thickness 2 and 3 cm, finish polished. The largest bundle is MDC-01, with 55 slabs of about 2.70 × 1.64 m. From our own quarries.

Apuan white marble with a pure white ground and bold, sparse grey veins: the most prized of the Carrara marbles, chosen on the block for bathrooms, stairs and statement pieces.

Why Statuario for floors

In marble every slab has its own veining: choosing slabs from the same bundle keeps the pattern continuous from one piece to the next.

For indoor floors 2 cm is the usual thickness; 3 cm is chosen where traffic is heavy or the substrate is less regular. Slabs are cut into squares, random lengths or patterns.

On a marble floor the polished finish shows foot traffic wear over time; honed ages more evenly.

The light tone (white) reflects light and brightens rooms, but it shows stains and marks: the choice of finish matters more than with dark tones.

Thickness, weight and workmanship

In stock: thickness 2 and 3 cm. 2 cm ≈ 54 kg/m²; 3 cm ≈ 81 kg/m².

Indicative values for Statuario from the data sheet: density 2,710 kg/m³, water absorption 0.09%, compressive strength 91.6 MPa and flexural strength 15.9 MPa.

The workshop cuts modular formats, inserts and borders; skirtings and thresholds come from the same slab and are drawn in the Skirting tool.

Indicative yield of the largest bundle: about 207 m² laid, after a 15% allowance for waste.

Laying and care

Before laying it pays to lay the slabs out dry and number them: the veining then looks as designed.

Of these bundles 6 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.

We also hold 16 blocks of Statuario in stock: for a large project the block can be chosen and sawn to size.

Shipping and packing from Carrara

If you do not yet know how many m² you need, use the slab calculator and then ask for the quote; we can reserve several slabs of the same bundle for you.

Bundles available

Frequently asked questions

What thickness should I choose for floors in Statuario?

For indoor floors 2 cm is the most used thickness, 3 cm where traffic is heavy or the substrate is irregular. In stock: thickness 2 and 3 cm.

Is Statuario suitable for floors?

Yes, Statuario (marble) is worked for floors in our workshop. In marble every slab has its own veining: choosing slabs from the same bundle keeps the pattern continuous from one piece to the next.

How much Statuario do you have now for floors?

Right now 16 bundles that fit, with 667 slabs (3,061 m²) and thickness 2 and 3 cm; MDC-01 is the largest (55 slabs, 2.70 × 1.64 m).

Do you ship Statuario outside Italy?

Slabs are packed on A-frames or in crates, strapped down and protected at the corners; bundle MDC-01 weighs about 13.2 t, a useful figure for choosing truck or container.

How is a floor in Statuario laid and kept?

It is laid on a flat screed with a suitable adhesive and thin joints. A protective treatment repeated now and then repels oil and wine; marked marble can be re-polished in the workshop.

WhatsApp