Marmi di Carrara, since 1956
Get a quote

Inventory · Onice Miele

Onice Miele for wall cladding: slabs and bundles in stock in Carrara

Ready in Carrara: 10 bundles of Onice Miele (onyx) suited for wall cladding. That is 395 slabs (1,828 m²), thickness 2 and 3 cm, finish polished; MDC-136 is the richest, with 53 slabs of 2.76 × 1.70 m. Imported directly and worked in our own workshops.

Why Onice Miele for wall cladding

Onyx slabs are usually reinforced with a fibre mesh and resin on the back: they are worked with care and laid on perfectly flat substrates.

Weight matters in cladding: it is fixed with suitable adhesives or mechanical anchors, and calculated from the weight per square metre given on this page.

Onyx on a wall is often backlit: a technical cavity is needed behind the slab for the LEDs and for ventilation.

Thickness, weight and workmanship

In stock: thickness 2 and 3 cm. 2 cm ≈ 54 kg/m²; 3 cm ≈ 81 kg/m².

Special pieces (corners, niches, mouldings) come from the same slab; mouldings are drawn in the dedicated tool.

Indicative yield of the largest bundle: about 219 m² of wall, after a 12% allowance for waste.

Laying and care

Wall laying uses an adhesive suited to the weight and the stone; large slabs are also fixed with mechanical anchors and sealed joints.

Of these bundles 5 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.

We also hold 2 blocks of Onice Miele in stock: for a large project the block can be chosen and sawn to size.

Shipping and packing from Carrara

To ask for Onice Miele, give the MDC number of the bundle you like (for example MDC-136) and use the guided quote: price is on request.

Bundles available

Frequently asked questions

What thickness should I choose for wall cladding in Onice Miele?

For wall cladding 2 cm is enough; 3 cm is used for very large slabs or mechanical fixing. In stock: thickness 2 and 3 cm.

Is Onice Miele suitable for wall cladding?

Yes, Onice Miele (onyx) is worked for wall cladding in our workshop. Onyx slabs are usually reinforced with a fibre mesh and resin on the back: they are worked with care and laid on perfectly flat substrates.

How much Onice Miele do you have now for wall cladding?

Right now 10 bundles that fit, with 395 slabs (1,828 m²) and thickness 2 and 3 cm; MDC-136 is the largest (53 slabs, 2.76 × 1.70 m).

Do you ship Onice Miele outside Italy?

Before shipping we photograph the bundle and prepare a slab-by-slab list with numbers and sizes; the type of packing (A-frames or crates) depends on destination and vehicle.

How is Onice Miele cladding fixed?

With adhesive suited to the weight or mechanical anchors for large slabs, on a flat, dry substrate. With continuous backlighting choose low-heat LEDs and keep the onyx away from strong heat sources.

WhatsApp