Marmi di Carrara, since 1956
Get a quote

Inventory · Onice Miele

Onice Miele for the bathroom: slabs and bundles in stock in Carrara

Onice Miele for the bathroom: the warehouse holds 3 bundles with thickness 3 cm, in all 97 slabs and 462 m², finish polished. Bundle MDC-131 (48 slabs, 2.81 × 1.77 m) is the one to start from when you need a lot of material with the same veining. Imported directly and worked in our own workshops.

Why Onice Miele for the bathroom

Onyx slabs are usually reinforced with a fibre mesh and resin on the back: they are worked with care and laid on perfectly flat substrates.

Basins, shower trays and wet-area cladding need 3–4 cm slabs worked in the workshop, with rounded edges and careful sealing.

Onyx in the bathroom needs careful sealing and no knocks: it suits decorative basins and cladding more than heavily used surfaces.

Thickness, weight and workmanship

In stock: thickness 3 cm. 3 cm ≈ 81 kg/m².

Basins and shower trays are milled from the slab or block, then finished by hand on the edges and sealed.

Indicative yield: each slab (2.81 × 1.77 m) gives about 9 pieces of 90 × 50 cm (trays, shelves, basins), about 432 in the largest bundle.

Laying and care

Basin and shower tray are laid on a flat substrate with sealant; the tray needs a fall towards the drain.

We also hold 2 blocks of Onice Miele in stock: for a large project the block can be chosen and sawn to size.

Shipping and packing from Carrara

Open the bundle page, check the photo and size of every slab and send the request with the MDC number: we reply with availability and terms.

Bundles available

Frequently asked questions

What thickness should I choose for bathrooms (basins and shower trays) in Onice Miele?

For basins and shower trays cut from a slab, 3 or 4 cm are needed to get strong edges and joints. In stock: thickness 3 cm.

Is Onice Miele suitable for the bathroom?

Yes, Onice Miele (onyx) is worked for the bathroom in our workshop. The translucency of onyx shows at its best with LED backlighting, which brings out bands and veining; this is why the slabs are reinforced on the back.

How much Onice Miele do you have now for the bathroom?

Right now 3 bundles that fit, with 97 slabs (462 m²) and thickness 3 cm; MDC-131 is the largest (48 slabs, 2.81 × 1.77 m).

Do you ship Onice Miele outside Italy?

Slabs are packed on A-frames or in crates, strapped down and protected at the corners; bundle MDC-131 weighs about 19.3 t, a useful figure for choosing truck or container.

Does Onice Miele stand up to water in the bathroom?

Yes, if it is sealed and treated with a water repellent; acids and aggressive descalers are avoided. With continuous backlighting choose low-heat LEDs and keep the onyx away from strong heat sources.

WhatsApp