Marmi di Carrara, since 1956
Get a quote

Inventory · Onice Miele

Onice Miele for vanity tops: slabs and bundles in stock in Carrara

Onice Miele for vanity tops: the warehouse holds 10 bundles with thickness 2 and 3 cm, in all 395 slabs and 1,828 m², finish polished. Bundle MDC-136 (53 slabs, 2.76 × 1.70 m) is the one to start from when you need a lot of material with the same veining. Imported directly and worked in our own workshops.

Why Onice Miele for vanity tops

Onyx slabs are usually reinforced with a fibre mesh and resin on the back: they are worked with care and laid on perfectly flat substrates.

Vanity tops are made from 2 or 3 cm slabs with straight, bevelled or doubled edges; the usual depth is 50–55 cm.

An onyx vanity top is a striking but delicate choice: it does not take knocks or point loads and must always rest on a continuous support.

Thickness, weight and workmanship

In stock: thickness 2 and 3 cm. 2 cm ≈ 54 kg/m²; 3 cm ≈ 81 kg/m².

The top is cut to size with a basin cut-out (drop-in or undermount), holes for taps and an edge of your choice; an upstand can be added.

Indicative yield: each slab (2.76 × 1.70 m) gives about 6 tops of 120 × 50 cm, about 318 in the largest bundle.

Laying and care

Silicone goes on the joints with the wall and around the basin; the upstand is glued to the wall.

Of these bundles 5 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.

We also hold 2 blocks of Onice Miele in stock: for a large project the block can be chosen and sawn to size.

Shipping and packing from Carrara

Open the bundle page, check the photo and size of every slab and send the request with the MDC number: we reply with availability and terms.

Bundles available

Frequently asked questions

What thickness should I choose for vanity tops in Onice Miele?

For a vanity top 2 or 3 cm is fine; at 2 cm the front edge is doubled. In stock: thickness 2 and 3 cm.

Is Onice Miele suitable for vanity tops?

Onice Miele works for vanity tops, as long as the right thickness (2 and 3 cm) and finish (polished) are chosen. Onyx is a translucent stone with bands and clouds of colour: thin and delicate, it belongs where it takes no knocks or loads, for example on walls and lightly used tops.

How much Onice Miele do you have now for vanity tops?

Today in the Carrara warehouse: 10 bundles, 395 slabs, 1,828 m²; finish polished. Bundle MDC-136 has 53 slabs of about 2.76 × 1.70 m.

Do you ship Onice Miele outside Italy?

We ship from Carrara worldwide: slabs travel on A-frames or in ISPM 15 treated wooden crates, with corner guards and protection, and the bundle is loaded into a container or onto a truck. Times and costs are in the quote.

How do I protect a vanity top in Onice Miele?

With a water-based sealer after laying and a soft cloth to dry it. Onyx is cleaned only with a soft damp cloth and neutral detergent: no abrasives and no knocks, because it is fragile.

WhatsApp