Marmi di Carrara, since 1956
Get a quote

Inventory · Arabescato

Arabescato for wall cladding: slabs and bundles in stock in Carrara

Arabescato for wall cladding: the warehouse holds 5 bundles with thickness 2 and 3 cm, in all 192 slabs and 896 m², finish honed and polished. Bundle MDC-144 (54 slabs, 2.74 × 1.69 m) is the one to start from when you need a lot of material with the same veining. Imported directly and worked in our own workshops.

Why Arabescato for wall cladding

Marble can be honed or polished, and a water-based protective treatment helps repel oil and wine stains without changing how the stone looks.

Weight matters in cladding: it is fixed with suitable adhesives or mechanical anchors, and calculated from the weight per square metre given on this page.

Thickness, weight and workmanship

In stock: thickness 2 and 3 cm. 2 cm ≈ 54 kg/m²; 3 cm ≈ 82 kg/m².

Indicative values for Arabescato from the data sheet: density 2,720 kg/m³, water absorption 0.10%, compressive strength 88.4 MPa and flexural strength 11.9 MPa.

Consecutive slabs give book-matched panels, trimmed flush and mitred at 45° for the corners.

Indicative yield of the largest bundle: about 220 m² of wall, after a 12% allowance for waste.

Laying and care

In damp rooms the stone is laid with white adhesive (so as not to stain light stones) and sealed joints.

Of these bundles 4 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.

We also hold 1 block of Arabescato in stock: for a large project the block can be chosen and sawn to size.

Shipping and packing from Carrara

Open the bundle page, check the photo and size of every slab and send the request with the MDC number: we reply with availability and terms.

Bundles available

Frequently asked questions

What thickness should I choose for wall cladding in Arabescato?

For wall cladding 2 cm is enough; 3 cm is used for very large slabs or mechanical fixing. In stock: thickness 2 and 3 cm.

Is Arabescato suitable for wall cladding?

Arabescato works for wall cladding, as long as the right thickness (2 and 3 cm) and finish (honed and polished) are chosen. Marble is a metamorphic limestone rock: it works well, takes a polish and has unique veining, but it reacts to acids (lemon, vinegar, some cleaners) that can dull the polished surface.

How much Arabescato do you have now for wall cladding?

Today in the Carrara warehouse: 5 bundles, 192 slabs, 896 m²; finish honed and polished. Bundle MDC-144 has 54 slabs of about 2.74 × 1.69 m.

Do you ship Arabescato outside Italy?

We ship from Carrara worldwide: slabs travel on A-frames or in ISPM 15 treated wooden crates, with corner guards and protection, and the bundle is loaded into a container or onto a truck. Times and costs are in the quote.

How is Arabescato cladding fixed?

With adhesive suited to the weight or mechanical anchors for large slabs, on a flat, dry substrate. For daily cleaning water and a pH-neutral detergent are enough; avoid acids, descalers and abrasive sponges, which dull polished marble.

WhatsApp
Arabescato for wall cladding · slabs in Carrara