Arabescato for floors: slabs and bundles in stock in Carrara
Ready in Carrara: 5 bundles of Arabescato (marble) suited for floors. That is 192 slabs (896 m²), thickness 2 and 3 cm, finish honed and polished; MDC-144 is the richest, with 54 slabs of 2.74 × 1.69 m. Imported directly and worked in our own workshops.
Why Arabescato for floors
Marble can be honed or polished, and a water-based protective treatment helps repel oil and wine stains without changing how the stone looks.
For indoor floors 2 cm is the usual thickness; 3 cm is chosen where traffic is heavy or the substrate is less regular. Slabs are cut into squares, random lengths or patterns.
On a marble floor the polished finish shows foot traffic wear over time; honed ages more evenly.
Thickness, weight and workmanship
In stock: thickness 2 and 3 cm. 2 cm ≈ 54 kg/m²; 3 cm ≈ 82 kg/m².
Indicative values for Arabescato from the data sheet: density 2,720 kg/m³, water absorption 0.10%, compressive strength 88.4 MPa and flexural strength 11.9 MPa.
The slab is cut into squares, random lengths or geometric patterns; edges are finished sharp or with a small bevel, and the skirting comes from the same slab.
Indicative yield of the largest bundle: about 212 m² laid, after a 15% allowance for waste.
Laying and care
Before laying it pays to lay the slabs out dry and number them: the veining then looks as designed.
Of these bundles 4 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.
We also hold 1 block of Arabescato in stock: for a large project the block can be chosen and sawn to size.
Shipping and packing from Carrara
To ask for Arabescato, give the MDC number of the bundle you like (for example MDC-144) and use the guided quote: price is on request.
Bundles available

Arabescato MDC-144
54 slabs, 2 cm, honed, 2.74 × 1.69 m, yield ≈ 212 m² laid

Arabescato MDC-145
48 slabs, 3 cm, polished, 2.82 × 1.71 m, yield ≈ 197 m² laid

Arabescato MDC-147
41 slabs, 3 cm, polished, 2.60 × 1.65 m, yield ≈ 149 m² laid

Arabescato MDC-19
36 slabs, 3 cm, polished, 2.75 × 1.77 m, yield ≈ 149 m² laid

Arabescato MDC-146
13 slabs, 2 cm, polished, 2.83 × 1.73 m, yield ≈ 54 m² laid
Frequently asked questions
What thickness should I choose for floors in Arabescato?
For indoor floors 2 cm is the most used thickness, 3 cm where traffic is heavy or the substrate is irregular. In stock: thickness 2 and 3 cm.
Is Arabescato suitable for floors?
Arabescato works for floors, as long as the right thickness (2 and 3 cm) and finish (honed and polished) are chosen. Marble can be honed or polished, and a water-based protective treatment helps repel oil and wine stains without changing how the stone looks.
How much Arabescato do you have now for floors?
Today in the Carrara warehouse: 5 bundles, 192 slabs, 896 m²; finish honed and polished. Bundle MDC-144 has 54 slabs of about 2.74 × 1.69 m.
Do you ship Arabescato outside Italy?
The warehouse is in Carrara, close to the ports of La Spezia and Genoa: containers leave from here for overseas and trucks for Europe, with packing and loading handled by our own staff.
How is a floor in Arabescato laid and kept?
It is laid on a flat screed with a suitable adhesive and thin joints. For daily cleaning water and a pH-neutral detergent are enough; avoid acids, descalers and abrasive sponges, which dull polished marble.
