Arabescato for tables: slabs and bundles in stock in Carrara
For tables we now hold 3 bundles of Arabescato in the Carrara warehouse: 125 slabs totalling 583 m², thickness 3 cm, finish polished. The largest bundle is MDC-145, with 48 slabs of about 2.82 × 1.71 m. Imported directly and worked in our own workshops.
Why Arabescato for tables
Marble can be honed or polished, and a water-based protective treatment helps repel oil and wine stains without changing how the stone looks.
A stone table lasts for years but is heavy: the 3–4 cm top rests on a sturdy base and is chosen by looking at where the veining falls at the centre.
Thickness, weight and workmanship
In stock: thickness 3 cm. 3 cm ≈ 82 kg/m².
Indicative values for Arabescato from the data sheet: density 2,720 kg/m³, water absorption 0.10%, compressive strength 88.4 MPa and flexural strength 11.9 MPa.
With two consecutive slabs a book-matched table is made, with the veining mirrored at the centre of the top.
Indicative yield: each slab (2.82 × 1.71 m) gives about 1 tops of 200 × 100 cm, about 48 in the largest bundle.
Laying and care
After delivery the top is treated with a protector and always moved by two or more people.
Of these bundles 3 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.
We also hold 1 block of Arabescato in stock: for a large project the block can be chosen and sawn to size.
Shipping and packing from Carrara
If you do not yet know how many m² you need, use the slab calculator and then ask for the quote; we can reserve several slabs of the same bundle for you.
Bundles available

Arabescato MDC-145
48 slabs, 3 cm, polished, 2.82 × 1.71 m, yield ≈ 48 tops of 200 × 100 cm

Arabescato MDC-147
41 slabs, 3 cm, polished, 2.60 × 1.65 m, yield ≈ 41 tops of 200 × 100 cm

Arabescato MDC-19
36 slabs, 3 cm, polished, 2.75 × 1.77 m, yield ≈ 36 tops of 200 × 100 cm

Arabescato MDC9129
block 215×176×127 cm, 13.0 t
Frequently asked questions
What thickness should I choose for tables in Arabescato?
For a table top 3 cm is the minimum for good sturdiness, 4 cm for long tops or overhangs. In stock: thickness 3 cm.
Is Arabescato suitable for tables?
Yes, Arabescato (marble) is worked for tables in our workshop. Marble is a metamorphic limestone rock: it works well, takes a polish and has unique veining, but it reacts to acids (lemon, vinegar, some cleaners) that can dull the polished surface.
How much Arabescato do you have now for tables?
Right now 3 bundles that fit, with 125 slabs (583 m²) and thickness 3 cm; MDC-145 is the largest (48 slabs, 2.82 × 1.71 m).
Do you ship Arabescato outside Italy?
Before shipping we photograph the bundle and prepare a slab-by-slab list with numbers and sizes; the type of packing (A-frames or crates) depends on destination and vehicle.
How much does a table in Arabescato weigh?
At 3 cm one square metre weighs about 82 kg/m²; a 2 m² top weighs twice that, so a sturdy base is needed. A protective treatment repeated now and then repels oil and wine; marked marble can be re-polished in the workshop.
