Marmi di Carrara, since 1956
Get a quote

Guides · Marmi di Carrara · 1956

Marble finishes: polished, honed, bush-hammered

Updated · By Marmi di Carrara srl

Polished: light and vein in the foreground

Polishing closes the surface pores and creates a deep reflection. In white marbles with a strong vein, such as Calacatta and Statuario, it is the finish that makes the pattern most visible. In exchange polished is sensitive: a drop of lemon or vinegar dulls the shine at that spot and scratches show against the light. In showpiece rooms, guest bathrooms, interior stairs and walls it works very well.

Honed: matt, soft, practical

Honed is a flat, satin surface without a mirror reflection. It does not hide acid etching, but makes it far less visible, which is why many people choose honed for kitchen and bathroom tops. The colour looks slightly warmer and the vein softer. It is easy to clean and pleasant to the touch.

Brushed: light texture

Brushing works the surface with abrasive brushes and leaves a light texture you can feel. It gives a more natural effect, hides fingerprints and improves grip. It is worth considering for busy interior floors, cladding and tops where a less formal look is wanted. It is on request and not available from warehouse stock.

Bush-hammered and flamed: outdoors and slip resistance

Bush-hammering strikes the surface with a pointed hammer and makes it rough; flaming uses heat and works mainly on granites and hard stones. Both increase grip, which makes them typical for outdoors, pool edges and ramps. The colour becomes lighter and matt, and the vein shows less. For outdoor use always check the material with us: not every marble is suited to frost.

Antiqued and other finishes on request

Antiqued (or aged) softens edges and surface to suggest stone worn by time. It is used in cladding, classic floors and restoration. Like the rough finishes it reduces the visibility of marks but makes cleaning a little harder, because the surface holds more dust.

How to choose in practice

For a kitchen top: honed, or polished if you accept that it will show marks over time. For a bathroom: polished on the walls, honed or brushed on the shower floor for grip. For an interior floor: honed or brushed. For outdoors: bush-hammered or brushed, never polished when wet. Tell us the use and the material and we will list the real options.

Frequently asked questions

Polished or honed for a kitchen top?
Honed is more practical because it hides small etching better; polished enhances the vein but marks sooner.
Which finishes do you hold in stock?
Polished and honed. Brushed, flamed, bush-hammered and antiqued are on request.
Is bush-hammered marble fine outdoors?
Bush-hammering gives grip, but the choice of material matters: it must withstand frost and damp.
Can a polished finish be redone?
Yes, a top that has lost its shine can be re-polished by a professional.
Can the finish be changed later?
You can go from polished to honed with new work, but it is better to decide before installation.

See also

Request a quote

WhatsApp