Marmi di Carrara, since 1956
Get a quote

Guides · Marmi di Carrara · 1956

How to choose marble slabs without mistakes

Updated · By Marmi di Carrara srl

A sample and a slab are not the same thing

A sample is a piece of a few centimetres, chosen to show colour. A slab is several square metres and the vein can concentrate in one area, darken or lighten. So before deciding, look at the photo of the real slab in natural light and, if possible, see it in person in the Carrara warehouse. The same material name can mean very different slabs from one block to another.

The same lot: uniformity and continuity

A lot gathers slabs from the same block: colour, grain and vein are consistent, and consecutive slabs have a vein that carries on. For a floor, cladding or bathroom, choosing everything from one lot avoids tone differences from one wall to another. If your project needs more slabs than a lot contains, talk to us beforehand: it is wise to decide which ones to pair.

Thickness, finish and sizes

Check thickness in advance (in the warehouse 2, 3 or 4 cm) and finish (polished or honed). Then calculate the surface and add offcuts: areas near cut-outs, edges and joints need extra cutting. Our slab calculator tells you how many are needed for your sizes; with the real slabs on the drawing you decide where vein and joints fall.

Natural marks are not flaws

Veining, colour clouds, small fissures re-cemented in nature and tone changes are normal in marble. The real checks are different: through cracks, foreign stains, areas of odd colour, chipped corners. The photos of each slab show the whole surface; if an area does not convince you, ask to see the detail before reserving.

How to spot real marble

Real marble has veins that do not repeat identically, shows depth under the polished surface and feels cold to the touch. Imitation materials (porcelain, quartz, resin) often repeat the same pattern on several slabs. Do not test with acids on the slab: if you want a test, ask for an offcut. When in doubt, a serious supplier gives you the material sheet and the name of the variety.

Reserve before you decide

When you like a slab you can reserve it for 3, 7 or 14 days: nobody sells it meanwhile and you have time to compare. Then you can ask for a quote with sizes and, to see the result, try the material in your own room with the site tools. The more you know beforehand, the fewer surprises at installation.

Frequently asked questions

Can I see the slab before buying?
Yes: every warehouse slab has its photos, and you can come and see it in Carrara.
How long can I reserve a slab for?
For 3, 7 or 14 days.
How many slabs do I need?
It depends on sizes and offcuts. The slab calculator on the site gives you an indicative number for your sizes.
Are fissures in marble a flaw?
Small healed fissures are natural; through cracks should be avoided and show up in the photos.
Can I mix slabs from different lots?
You can, but colour and vein may differ. For large rooms a single lot is better.

See also

Request a quote

WhatsApp