Marmi di Carrara, since 1956
Get a quote

Guides · Marmi di Carrara · 1956

Bookmatch marble: what it is and how it works

Updated · By Marmi di Carrara srl

How the mirrored pattern happens

A block is sawn into slabs one after the other, and the vein changes very little from one slab to the next. If the first and second are opened like a book, the line running on one page is found identical, but reversed, on the other. The result is a symmetrical figure that can recall butterflies, waves or a tree. The stronger the vein, the more spectacular the effect.

Variants: book, diamond, slip

Classic bookmatch (book style) pairs two slabs. With four consecutive slabs you get a four-way or diamond match, where the pattern repeats as a mirror both horizontally and vertically. Slip match, instead, places the slabs side by side without flipping them: the vein continues in a regular rhythm but is not symmetrical. It is used when a linear flow is wanted without the mirror effect.

Which marbles suit it

You need visible veins that are not too dense, like those of white marbles with a grey or golden vein, of Arabescato, of Calacatta and of many coloured marbles and onyxes. Very uniform marbles give little result because there is nothing to mirror. Polished enhances the symmetry; honed makes it more discreet. Remember that slab thickness must be the same: ours are 2, 3 or 4 cm.

Why the same lot is needed

Only consecutive slabs from the same block have a vein that continues. Two slabs with the same name but from different blocks do not give a mirrored pattern. That is why the choice is made by looking at the photo of each slab in a lot and checking the numbers: ask us which ones are consecutive. If the project needs several pairs, it is better to check before reserving.

Where it works best

Feature walls, cladding of important bathrooms, kitchen splashbacks, entrances and bed headboards are the typical places. On a kitchen top the effect is strong but needs careful cutting of cut-outs and joints. On a floor it can be used in showpiece areas. In any case it is wise to draw the layout first, using the real slab sizes.

Planning without surprises

Always ask for the cutting drawing with the position of the joint. Consider trimming margins: edges and cut-outs may cut away part of the symmetry. Take into account the weight of the slabs and how they will reach the site. And if you are unsure about the effect, try the material first in your own room with the visualisation tool.

Frequently asked questions

How many slabs does a bookmatch need?
Two consecutive slabs make a pair; four give a four-way match. The number depends on the wall dimensions.
Can any marble be bookmatched?
It can, but it only works well with visible veining. In very uniform marbles the effect is barely noticeable.
How do I know if two slabs are consecutive?
From the lot numbers and the photo of each slab: we tell you which ones are consecutive.
Can I bookmatch slabs of different thickness?
No, thickness and finish must be the same.
Is the joint visible in a bookmatch?
The joint always stays visible as a thin line, but the vein continues from one slab to the other and the pattern makes it discreet.

See also

Request a quote

WhatsApp