marble wall cladding · Carrara · 1956
Marble wall cladding: idea 3 from the Marmi di Carrara archive

In short
Marble wall cladding: looking for ideas? Here is a photo (square shot) with suitable materials, common finishes and advice from people who have worked stone in Carrara since 1956.
Typical applications: lift linings, shower walls and reception backdrops. Interior walls need only 1-2 cm; thin or lightweight panels reduce weight and loads; large slabs call for studied fixings and joints. Polished, honed or satin; the veining can be book-matched for a symmetrical pattern on the wall.
- Space
- marble wall cladding
- Applications
- interior walls, entrances and lobbies, lift linings, shower walls
- Typical thickness
- Interior walls need only 1-2 cm; thin or lightweight panels reduce weight and loads; large slabs call for studied fixings and joints.
- Finishes
- Polished, honed or satin; the veining can be book-matched for a symmetrical pattern on the wall.
- Care
- A soft, barely damp cloth is enough; avoid acidic products. Wear on walls is low, but splashes of water and soap should be dried in wet areas.
- Suggested materials
- Statuario, Arabescato, Onice Ambra
- Size
- 1200 × 1221 px
- Photo
- Marmi di Carrara srl
Suitable materials
Materials to consider for this use: Statuario, Arabescato, Onice Ambra. These are suggestions, not the material shown in the photo: we choose together on samples and slabs in stock.
Related products
Where it is used
Shipping worldwide
We ship worldwide from Carrara. See the pages for the countries we serve: Germany, France, Italy, Saudi Arabia. Timing and documents change from country to country and are set out in the quote.
Our own quarries and workshops. We own the quarries of Statuario, Calacatta, Bianco Carrara, Bardiglio and Travertine; all other materials are imported directly and worked in our own workshops.
Frequently asked questions
Marble wall cladding: how much does it cost?
There is no single price: it depends on material, thickness, finish and processing (edges, holes, cut-outs). The Prices page shows indicative figures for the materials that have them; for your project we prepare a written quote.
Marble wall cladding: what thickness is needed?
Interior walls need only 1-2 cm; thin or lightweight panels reduce weight and loads; large slabs call for studied fixings and joints.
Marble wall cladding: can it be made to measure like the photo?
Yes, we work from drawings and measurements: sizes, edges, holes and cut-outs. You can start from a sketch or a photo and use our design tools before the quote.
Marble wall cladding: how is it installed?
We supply pieces to measure with fixing drawings; installation should go to an experienced stone fitter in your country. For lift linings and shower walls it pays to settle fixings and joints at drawing stage.
Design this space
Try the space with our tools: choose marble, edges and sizes, or start from your own photo. Then ask us for a quote.
Like this project? Send us a sketch or drawing for a piece list and a quote.
Send your drawing →More photos of the same space
More ideas

custom marble fabrication

marble quarries and rough blocks

marble fireplaces

marble washbasins and bathtubs
Also search
- marble wall cladding · Germany
- marble wall cladding · France
- marble wall cladding · Italy
- marble wall cladding · Saudi Arabia
- blue marble wall cladding
- 2 cm marble fireplaces
- 2 cm marble wall cladding
- 3 cm marble fireplaces
- 3 cm marble wall cladding
- Italian marble wall cladding Australia
- marble wall cladding
- onyx shower walls






