Onice Verde for vanity tops: slabs and bundles in stock in Carrara
Onice Verde for vanity tops: the warehouse holds 11 bundles with thickness 2 and 3 cm, in all 433 slabs and 1,976 m², finish polished. Bundle MDC-14 (55 slabs, 2.64 × 1.70 m) is the one to start from when you need a lot of material with the same veining. Imported directly and worked in our own workshops.
Onice Verde: green onyx, suitable for fireplaces and decorative objects.
Why Onice Verde for vanity tops
The translucency of onyx shows at its best with LED backlighting, which brings out bands and veining; this is why the slabs are reinforced on the back.
Vanity tops are made from 2 or 3 cm slabs with straight, bevelled or doubled edges; the usual depth is 50–55 cm.
An onyx vanity top is a striking but delicate choice: it does not take knocks or point loads and must always rest on a continuous support.
The colour (green) makes this stone the star of the space: use it on small surfaces or as an accent, unless you want a high-impact effect.
Thickness, weight and workmanship
In stock: thickness 2 and 3 cm. 2 cm ≈ 54 kg/m²; 3 cm ≈ 81 kg/m².
Tops are made with an integrated basin carved from solid or with a drop-in bowl.
Indicative yield: each slab (2.64 × 1.70 m) gives about 6 tops of 120 × 50 cm, about 330 in the largest bundle.
Laying and care
Tap holes are made in the workshop, not on site: the stone can chip.
Of these bundles 4 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.
Shipping and packing from Carrara
Open the bundle page, check the photo and size of every slab and send the request with the MDC number: we reply with availability and terms.
Bundles available

Onice Verde MDC-124
55 slabs, 2 cm, polished, 2.58 × 1.63 m, yield ≈ 330 tops of 120 × 50 cm

Onice Verde MDC-14
55 slabs, 3 cm, polished, 2.64 × 1.70 m, yield ≈ 330 tops of 120 × 50 cm

Onice Verde MDC-119
47 slabs, 3 cm, polished, 2.60 × 1.77 m, yield ≈ 282 tops of 120 × 50 cm

Onice Verde MDC-125
46 slabs, 3 cm, polished, 2.67 × 1.77 m, yield ≈ 276 tops of 120 × 50 cm

Onice Verde MDC-120
44 slabs, 2 cm, polished, 2.57 × 1.74 m, yield ≈ 264 tops of 120 × 50 cm

Onice Verde MDC-121
40 slabs, 3 cm, polished, 2.75 × 1.78 m, yield ≈ 240 tops of 120 × 50 cm

Onice Verde MDC-118
39 slabs, 2 cm, polished, 2.62 × 1.66 m, yield ≈ 234 tops of 120 × 50 cm

Onice Verde MDC-309
35 slabs, 2 cm, polished, 2.80 × 1.66 m, yield ≈ 210 tops of 120 × 50 cm

Onice Verde MDC-123
31 slabs, 3 cm, polished, 2.58 × 1.77 m, yield ≈ 186 tops of 120 × 50 cm

Onice Verde MDC-122
27 slabs, 2 cm, polished, 2.70 × 1.78 m, yield ≈ 162 tops of 120 × 50 cm

Onice Verde MDC-308
14 slabs, 3 cm, polished, 2.81 × 1.74 m, yield ≈ 84 tops of 120 × 50 cm
Frequently asked questions
What thickness should I choose for vanity tops in Onice Verde?
For a vanity top 2 or 3 cm is fine; at 2 cm the front edge is doubled. In stock: thickness 2 and 3 cm.
Is Onice Verde suitable for vanity tops?
Yes, Onice Verde (onyx) is worked for vanity tops in our workshop. Onyx is a translucent stone with bands and clouds of colour: thin and delicate, it belongs where it takes no knocks or loads, for example on walls and lightly used tops.
How much Onice Verde do you have now for vanity tops?
Right now 11 bundles that fit, with 433 slabs (1,976 m²) and thickness 2 and 3 cm; MDC-14 is the largest (55 slabs, 2.64 × 1.70 m).
Do you ship Onice Verde outside Italy?
Slabs are packed on A-frames or in crates, strapped down and protected at the corners; bundle MDC-14 weighs about 20.0 t, a useful figure for choosing truck or container.
How do I protect a vanity top in Onice Verde?
With a water-based sealer after laying and a soft cloth to dry it. With continuous backlighting choose low-heat LEDs and keep the onyx away from strong heat sources.
