Onice Verde for tables: slabs and bundles in stock in Carrara
In the Carrara warehouse Onice Verde is present with 6 bundles that suit tables: 233 slabs, 1,085 m², thickness 3 cm and finish polished. The average slab of MDC-14 measures about 2.64 × 1.70 m, and the bundle counts 55 slabs. Imported directly and worked in our own workshops.
Onice Verde: green onyx, suitable for fireplaces and decorative objects.
Why Onice Verde for tables
Onyx slabs are usually reinforced with a fibre mesh and resin on the back: they are worked with care and laid on perfectly flat substrates.
For a dining table the slab is cut as a rectangle, oval or circle; if a long top is needed, a single slab avoids joints in the middle.
An onyx table is a striking but delicate choice: the top does not take knocks or point loads and must be used with a support underneath.
The colour (green) makes this stone the star of the space: use it on small surfaces or as an accent, unless you want a high-impact effect.
Thickness, weight and workmanship
In stock: thickness 3 cm. 3 cm ≈ 81 kg/m².
The top is cut to shape (rectangular, oval, round) and finished on the edges; the slab is chosen also for how the veining falls at the centre.
Indicative yield: each slab (2.64 × 1.70 m) gives about 1 tops of 200 × 100 cm, about 55 in the largest bundle.
Laying and care
The top rests on the base with rubber spacers and hidden fixings; the weight per square metre is used to choose the supports.
Of these bundles 2 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.
Shipping and packing from Carrara
If you do not yet know how many m² you need, use the slab calculator and then ask for the quote; we can reserve several slabs of the same bundle for you.
Bundles available

Onice Verde MDC-14
55 slabs, 3 cm, polished, 2.64 × 1.70 m, yield ≈ 55 tops of 200 × 100 cm

Onice Verde MDC-119
47 slabs, 3 cm, polished, 2.60 × 1.77 m, yield ≈ 47 tops of 200 × 100 cm

Onice Verde MDC-125
46 slabs, 3 cm, polished, 2.67 × 1.77 m, yield ≈ 46 tops of 200 × 100 cm

Onice Verde MDC-121
40 slabs, 3 cm, polished, 2.75 × 1.78 m, yield ≈ 40 tops of 200 × 100 cm

Onice Verde MDC-123
31 slabs, 3 cm, polished, 2.58 × 1.77 m, yield ≈ 31 tops of 200 × 100 cm

Onice Verde MDC-308
14 slabs, 3 cm, polished, 2.81 × 1.74 m, yield ≈ 14 tops of 200 × 100 cm
Frequently asked questions
What thickness should I choose for tables in Onice Verde?
For a table top 3 cm is the minimum for good sturdiness, 4 cm for long tops or overhangs. In stock: thickness 3 cm.
Is Onice Verde suitable for tables?
Yes, Onice Verde (onyx) is worked for tables in our workshop. Onyx slabs are usually reinforced with a fibre mesh and resin on the back: they are worked with care and laid on perfectly flat substrates.
How much Onice Verde do you have now for tables?
Right now 6 bundles that fit, with 233 slabs (1,085 m²) and thickness 3 cm; MDC-14 is the largest (55 slabs, 2.64 × 1.70 m).
Do you ship Onice Verde outside Italy?
Slabs are packed on A-frames or in crates, strapped down and protected at the corners; bundle MDC-14 weighs about 20.0 t, a useful figure for choosing truck or container.
How much does a table in Onice Verde weigh?
At 3 cm one square metre weighs about 81 kg/m²; a 2 m² top weighs twice that, so a sturdy base is needed. With continuous backlighting choose low-heat LEDs and keep the onyx away from strong heat sources.
