Onice Rosa for wall cladding: slabs and bundles in stock in Carrara
For wall cladding we now hold 5 bundles of Onice Rosa in the Carrara warehouse: 190 slabs totalling 883 m², thickness 2 and 3 cm, finish polished. The largest bundle is MDC-85, with 51 slabs of about 2.66 × 1.71 m. Imported directly and worked in our own workshops.
Why Onice Rosa for wall cladding
The translucency of onyx shows at its best with LED backlighting, which brings out bands and veining; this is why the slabs are reinforced on the back.
On tall or continuous walls consecutive slabs from the same bundle matter: the veining runs on from one to the next, and the progressive number helps to lay them in order.
Onyx on a wall is often backlit: a technical cavity is needed behind the slab for the LEDs and for ventilation.
A stone of pink tone has a strong character: slabs from one bundle guarantee the same tone, because vivid colours vary a lot from bundle to bundle.
Thickness, weight and workmanship
In stock: thickness 2 and 3 cm. 2 cm ≈ 54 kg/m²; 3 cm ≈ 81 kg/m².
For walls the slabs are cut to size with holes for sockets and taps, numbered in laying order to keep the veining continuous.
Indicative yield of the largest bundle: about 204 m² of wall, after a 12% allowance for waste.
Laying and care
In damp rooms the stone is laid with white adhesive (so as not to stain light stones) and sealed joints.
Of these bundles 3 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.
Shipping and packing from Carrara
Open the bundle page, check the photo and size of every slab and send the request with the MDC number: we reply with availability and terms.
Bundles available

Onice Rosa MDC-85
51 slabs, 2 cm, polished, 2.66 × 1.71 m, yield ≈ 204 m² of wall

Onice Rosa MDC-83
46 slabs, 2 cm, polished, 2.65 × 1.77 m, yield ≈ 190 m² of wall

Onice Rosa MDC-07
43 slabs, 2 cm, polished, 2.66 × 1.64 m, yield ≈ 165 m² of wall

Onice Rosa MDC-84
42 slabs, 3 cm, polished, 2.81 × 1.77 m, yield ≈ 183 m² of wall

Onice Rosa MDC-86
8 slabs, 3 cm, polished, 2.82 × 1.78 m, yield ≈ 35 m² of wall
Frequently asked questions
What thickness should I choose for wall cladding in Onice Rosa?
For wall cladding 2 cm is enough; 3 cm is used for very large slabs or mechanical fixing. In stock: thickness 2 and 3 cm.
Is Onice Rosa suitable for wall cladding?
Onice Rosa works for wall cladding, as long as the right thickness (2 and 3 cm) and finish (polished) are chosen. Onyx slabs are usually reinforced with a fibre mesh and resin on the back: they are worked with care and laid on perfectly flat substrates.
How much Onice Rosa do you have now for wall cladding?
Today in the Carrara warehouse: 5 bundles, 190 slabs, 883 m²; finish polished. Bundle MDC-85 has 51 slabs of about 2.66 × 1.71 m.
Do you ship Onice Rosa outside Italy?
We ship from Carrara worldwide: slabs travel on A-frames or in ISPM 15 treated wooden crates, with corner guards and protection, and the bundle is loaded into a container or onto a truck. Times and costs are in the quote.
How is Onice Rosa cladding fixed?
With adhesive suited to the weight or mechanical anchors for large slabs, on a flat, dry substrate. Onyx is cleaned only with a soft damp cloth and neutral detergent: no abrasives and no knocks, because it is fragile.
