Marmi di Carrara, since 1956
Get a quote

Inventory · Onice Rosa

Onice Rosa for vanity tops: slabs and bundles in stock in Carrara

Ready in Carrara: 5 bundles of Onice Rosa (onyx, pink) suited for vanity tops. That is 190 slabs (883 m²), thickness 2 and 3 cm, finish polished; MDC-85 is the richest, with 51 slabs of 2.66 × 1.71 m. Imported directly and worked in our own workshops.

Why Onice Rosa for vanity tops

Onyx slabs are usually reinforced with a fibre mesh and resin on the back: they are worked with care and laid on perfectly flat substrates.

A vanity top is a small but very visible piece: it is cut from a well-chosen slab, with a cut-out for the basin and a drip edge on the front.

An onyx vanity top is a striking but delicate choice: it does not take knocks or point loads and must always rest on a continuous support.

The colour (pink) makes this stone the star of the space: use it on small surfaces or as an accent, unless you want a high-impact effect.

Thickness, weight and workmanship

In stock: thickness 2 and 3 cm. 2 cm ≈ 54 kg/m²; 3 cm ≈ 81 kg/m².

The top is cut to size with a basin cut-out (drop-in or undermount), holes for taps and an edge of your choice; an upstand can be added.

Indicative yield: each slab (2.66 × 1.71 m) gives about 6 tops of 120 × 50 cm, about 306 in the largest bundle.

Laying and care

The top rests on a cabinet or on brackets fixed to the wall; the weight per square metre above is used to size the supports.

Of these bundles 3 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.

Shipping and packing from Carrara

To ask for Onice Rosa, give the MDC number of the bundle you like (for example MDC-85) and use the guided quote: price is on request.

Bundles available

Frequently asked questions

What thickness should I choose for vanity tops in Onice Rosa?

For a vanity top 2 or 3 cm is fine; at 2 cm the front edge is doubled. In stock: thickness 2 and 3 cm.

Is Onice Rosa suitable for vanity tops?

Yes, Onice Rosa (onyx) is worked for vanity tops in our workshop. Onyx slabs are usually reinforced with a fibre mesh and resin on the back: they are worked with care and laid on perfectly flat substrates.

How much Onice Rosa do you have now for vanity tops?

Right now 5 bundles that fit, with 190 slabs (883 m²) and thickness 2 and 3 cm; MDC-85 is the largest (51 slabs, 2.66 × 1.71 m).

Do you ship Onice Rosa outside Italy?

Before shipping we photograph the bundle and prepare a slab-by-slab list with numbers and sizes; the type of packing (A-frames or crates) depends on destination and vehicle.

How do I protect a vanity top in Onice Rosa?

With a water-based sealer after laying and a soft cloth to dry it. With continuous backlighting choose low-heat LEDs and keep the onyx away from strong heat sources.

WhatsApp
Onice Rosa for vanity tops · slabs in Carrara