Marmi di Carrara, since 1956
Get a quote

Inventory · Giallo Siena

Giallo Siena for fireplaces: slabs and bundles in stock in Carrara

Ready in Carrara: 17 bundles of Giallo Siena (marble, yellow) suited for fireplaces. That is 662 slabs (3,056 m²), thickness 2 and 3 cm, finish polished; MDC-53 is the richest, with 53 slabs of 2.82 × 1.76 m. Imported directly and worked in our own workshops.

Why Giallo Siena for fireplaces

In marble every slab has its own veining: choosing slabs from the same bundle keeps the pattern continuous from one piece to the next.

Around a fire the stone must be kept away from the flame with a refractory backing: the surround is decorative and goes with a suitable firebox.

The light tone (yellow) reflects light and brightens rooms, but it shows stains and marks: the choice of finish matters more than with dark tones.

Thickness, weight and workmanship

In stock: thickness 2 and 3 cm. 2 cm ≈ 54 kg/m²; 3 cm ≈ 81 kg/m².

Indicative values for Giallo Siena from the data sheet: density 2,710 kg/m³, water absorption 0.12%, compressive strength 89.4 MPa and flexural strength 21.2 MPa.

The fireplace surround is cut to drawing, with 45° mitres and a fillet where requested.

Indicative yield: each slab (2.82 × 1.76 m) gives about 7 pieces of 150 × 40 cm (jambs, mantels), about 371 in the largest bundle.

Laying and care

The safety distance from the firebox is checked with the fireplace installer before cutting.

Of these bundles 4 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.

We also hold 2 blocks of Giallo Siena in stock: for a large project the block can be chosen and sawn to size.

Shipping and packing from Carrara

If you do not yet know how many m² you need, use the slab calculator and then ask for the quote; we can reserve several slabs of the same bundle for you.

Bundles available

Frequently asked questions

What thickness should I choose for fireplaces in Giallo Siena?

To clad a fireplace 2 or 3 cm is enough, depending on whether the slab is set in place or fixed mechanically. In stock: thickness 2 and 3 cm.

Is Giallo Siena suitable for fireplaces?

Yes, Giallo Siena (marble) is worked for fireplaces in our workshop. In marble every slab has its own veining: choosing slabs from the same bundle keeps the pattern continuous from one piece to the next.

How much Giallo Siena do you have now for fireplaces?

Right now 17 bundles that fit, with 662 slabs (3,056 m²) and thickness 2 and 3 cm; MDC-53 is the largest (53 slabs, 2.82 × 1.76 m).

Do you ship Giallo Siena outside Italy?

Before shipping we photograph the bundle and prepare a slab-by-slab list with numbers and sizes; the type of packing (A-frames or crates) depends on destination and vehicle.

Can Giallo Siena be used around a fireplace?

Yes as a surround, kept apart from the firebox with a refractory backing: the safety distance is checked with the installer. A protective treatment repeated now and then repels oil and wine; marked marble can be re-polished in the workshop.

WhatsApp
Giallo Siena for fireplaces · slabs in Carrara