Giallo Siena for the bathroom: slabs and bundles in stock in Carrara
For bathrooms (basins and shower trays) we now hold 8 bundles of Giallo Siena in the Carrara warehouse: 327 slabs totalling 1,469 m², thickness 3 and 4 cm, finish polished. The largest bundle is MDC-53, with 53 slabs of about 2.82 × 1.76 m. Imported directly and worked in our own workshops.
Why Giallo Siena for the bathroom
Marble can be honed or polished, and a water-based protective treatment helps repel oil and wine stains without changing how the stone looks.
In the bathroom the stone meets water and cosmetics: the finish is chosen carefully, sealed with suitable products and cleaned with neutral detergents.
In the bathroom polished marble marks with limescale, toothpaste and perfume: a honed finish and a sealer reduce the problem.
The light tone (yellow) reflects light and brightens rooms, but it shows stains and marks: the choice of finish matters more than with dark tones.
Thickness, weight and workmanship
In stock: thickness 3 and 4 cm. 3 cm ≈ 81 kg/m²; 4 cm ≈ 108 kg/m².
Indicative values for Giallo Siena from the data sheet: density 2,710 kg/m³, water absorption 0.12%, compressive strength 89.4 MPa and flexural strength 21.2 MPa.
Basins and shower trays are milled from the slab or block, then finished by hand on the edges and sealed.
Indicative yield: each slab (2.82 × 1.76 m) gives about 9 pieces of 90 × 50 cm (trays, shelves, basins), about 477 in the largest bundle.
Laying and care
Sealant is essential: joints and edges must be sealed and treated with a water repellent.
We also hold 2 blocks of Giallo Siena in stock: for a large project the block can be chosen and sawn to size.
Shipping and packing from Carrara
Open the bundle page, check the photo and size of every slab and send the request with the MDC number: we reply with availability and terms.
Bundles available

Giallo Siena MDC-73
54 slabs, 3 cm, polished, 2.59 × 1.71 m, yield ≈ 324 pieces of 90 × 50 cm

Giallo Siena MDC-53
53 slabs, 3 cm, polished, 2.82 × 1.76 m, yield ≈ 477 pieces of 90 × 50 cm

Giallo Siena MDC-247
47 slabs, 3 cm, polished, 2.81 × 1.62 m, yield ≈ 423 pieces of 90 × 50 cm

Giallo Siena MDC-66
45 slabs, 3 cm, polished, 2.60 × 1.65 m, yield ≈ 270 pieces of 90 × 50 cm

Giallo Siena MDC-05
40 slabs, 4 cm, polished, 2.59 × 1.64 m, yield ≈ 240 pieces of 90 × 50 cm

Giallo Siena MDC-249
40 slabs, 3 cm, polished, 2.60 × 1.77 m, yield ≈ 240 pieces of 90 × 50 cm

Giallo Siena MDC-251
31 slabs, 3 cm, polished, 2.63 × 1.64 m, yield ≈ 186 pieces of 90 × 50 cm

Giallo Siena MDC-71
17 slabs, 3 cm, polished, 2.59 × 1.63 m, yield ≈ 102 pieces of 90 × 50 cm
Frequently asked questions
What thickness should I choose for bathrooms (basins and shower trays) in Giallo Siena?
For basins and shower trays cut from a slab, 3 or 4 cm are needed to get strong edges and joints. In stock: thickness 3 and 4 cm.
Is Giallo Siena suitable for the bathroom?
Yes, Giallo Siena (marble) is worked for the bathroom in our workshop. Marble is a metamorphic limestone rock: it works well, takes a polish and has unique veining, but it reacts to acids (lemon, vinegar, some cleaners) that can dull the polished surface.
How much Giallo Siena do you have now for the bathroom?
Right now 8 bundles that fit, with 327 slabs (1,469 m²) and thickness 3 and 4 cm; MDC-53 is the largest (53 slabs, 2.82 × 1.76 m).
Do you ship Giallo Siena outside Italy?
Before shipping we photograph the bundle and prepare a slab-by-slab list with numbers and sizes; the type of packing (A-frames or crates) depends on destination and vehicle.
Does Giallo Siena stand up to water in the bathroom?
Yes, if it is sealed and treated with a water repellent; acids and aggressive descalers are avoided. A protective treatment repeated now and then repels oil and wine; marked marble can be re-polished in the workshop.
