Crema Marfil for vanity tops: slabs and bundles in stock in Carrara
Crema Marfil for vanity tops: the warehouse holds 12 bundles with thickness 2 and 3 cm, in all 494 slabs and 2,253 m², finish honed and polished. Bundle MDC-155 (55 slabs, 2.74 × 1.69 m) is the one to start from when you need a lot of material with the same veining. Imported directly and worked in our own workshops.
Why Crema Marfil for vanity tops
In marble every slab has its own veining: choosing slabs from the same bundle keeps the pattern continuous from one piece to the next.
A vanity top is a small but very visible piece: it is cut from a well-chosen slab, with a cut-out for the basin and a drip edge on the front.
On a marble vanity top perfumes, dyes and toothpaste can leave marks: a sealer and a honed finish help.
The light tone (beige) reflects light and brightens rooms, but it shows stains and marks: the choice of finish matters more than with dark tones.
Thickness, weight and workmanship
In stock: thickness 2 and 3 cm. 2 cm ≈ 54 kg/m²; 3 cm ≈ 81 kg/m².
A long top comes from a single slab, avoiding joints; the front can be doubled to look thicker.
Indicative yield: each slab (2.74 × 1.69 m) gives about 6 tops of 120 × 50 cm, about 330 in the largest bundle.
Laying and care
The top rests on a cabinet or on brackets fixed to the wall; the weight per square metre above is used to size the supports.
Of these bundles 4 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.
We also hold 1 block of Crema Marfil in stock: for a large project the block can be chosen and sawn to size.
Shipping and packing from Carrara
Open the bundle page, check the photo and size of every slab and send the request with the MDC number: we reply with availability and terms.
Bundles available

Crema Marfil MDC-155
55 slabs, 2 cm, honed, 2.74 × 1.69 m, yield ≈ 330 tops of 120 × 50 cm

Crema Marfil MDC-236
55 slabs, 2 cm, honed, 2.58 × 1.67 m, yield ≈ 330 tops of 120 × 50 cm

Crema Marfil MDC-235
53 slabs, 2 cm, polished, 2.70 × 1.76 m, yield ≈ 318 tops of 120 × 50 cm

Crema Marfil MDC-161
50 slabs, 2 cm, honed, 2.81 × 1.64 m, yield ≈ 300 tops of 120 × 50 cm

Crema Marfil MDC-160
48 slabs, 2 cm, honed, 2.67 × 1.65 m, yield ≈ 288 tops of 120 × 50 cm

Crema Marfil MDC-158
43 slabs, 2 cm, honed, 2.81 × 1.69 m, yield ≈ 258 tops of 120 × 50 cm

Crema Marfil MDC-157
40 slabs, 2 cm, honed, 2.81 × 1.65 m, yield ≈ 240 tops of 120 × 50 cm

Crema Marfil MDC-22
39 slabs, 3 cm, polished, 2.59 × 1.76 m, yield ≈ 234 tops of 120 × 50 cm

Crema Marfil MDC-237
38 slabs, 2 cm, honed, 2.60 × 1.64 m, yield ≈ 228 tops of 120 × 50 cm

Crema Marfil MDC-156
37 slabs, 2 cm, polished, 2.80 × 1.65 m, yield ≈ 222 tops of 120 × 50 cm

Crema Marfil MDC-159
21 slabs, 2 cm, polished, 2.80 × 1.65 m, yield ≈ 126 tops of 120 × 50 cm

Crema Marfil MDC-238
15 slabs, 2 cm, polished, 2.80 × 1.66 m, yield ≈ 90 tops of 120 × 50 cm
Frequently asked questions
What thickness should I choose for vanity tops in Crema Marfil?
For a vanity top 2 or 3 cm is fine; at 2 cm the front edge is doubled. In stock: thickness 2 and 3 cm.
Is Crema Marfil suitable for vanity tops?
Yes, Crema Marfil (marble) is worked for vanity tops in our workshop. In marble every slab has its own veining: choosing slabs from the same bundle keeps the pattern continuous from one piece to the next.
How much Crema Marfil do you have now for vanity tops?
Right now 12 bundles that fit, with 494 slabs (2,253 m²) and thickness 2 and 3 cm; MDC-155 is the largest (55 slabs, 2.74 × 1.69 m).
Do you ship Crema Marfil outside Italy?
Slabs are packed on A-frames or in crates, strapped down and protected at the corners; bundle MDC-155 weighs about 13.8 t, a useful figure for choosing truck or container.
How do I protect a vanity top in Crema Marfil?
With a water-based sealer after laying and a soft cloth to dry it. A protective treatment repeated now and then repels oil and wine; marked marble can be re-polished in the workshop.
