Marmi di Carrara, since 1956
Get a quote

Inventory · Crema Marfil

Crema Marfil for floors: slabs and bundles in stock in Carrara

Ready in Carrara: 12 bundles of Crema Marfil (marble, beige) suited for floors. That is 494 slabs (2,253 m²), thickness 2 and 3 cm, finish honed and polished; MDC-155 is the richest, with 55 slabs of 2.74 × 1.69 m. Imported directly and worked in our own workshops.

Why Crema Marfil for floors

Marble can be honed or polished, and a water-based protective treatment helps repel oil and wine stains without changing how the stone looks.

A stone floor is judged on its whole surface: slabs from the same bundle give an even tone and pattern, and a honed finish is less slippery than a polished one.

On a marble floor the polished finish shows foot traffic wear over time; honed ages more evenly.

The light tone (beige) reflects light and brightens rooms, but it shows stains and marks: the choice of finish matters more than with dark tones.

Thickness, weight and workmanship

In stock: thickness 2 and 3 cm. 2 cm ≈ 54 kg/m²; 3 cm ≈ 81 kg/m².

Floors are prepared to size: formats, laying order and piece numbering follow the project, so the veining runs from one piece to the next.

Indicative yield of the largest bundle: about 217 m² laid, after a 15% allowance for waste.

Laying and care

The substrate must be cured, flat and dry; the stone is laid with adhesive on a screed, with a thin joint and final grouting.

Of these bundles 4 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.

We also hold 1 block of Crema Marfil in stock: for a large project the block can be chosen and sawn to size.

Shipping and packing from Carrara

If you do not yet know how many m² you need, use the slab calculator and then ask for the quote; we can reserve several slabs of the same bundle for you.

Bundles available

Frequently asked questions

What thickness should I choose for floors in Crema Marfil?

For indoor floors 2 cm is the most used thickness, 3 cm where traffic is heavy or the substrate is irregular. In stock: thickness 2 and 3 cm.

Is Crema Marfil suitable for floors?

Yes, Crema Marfil (marble) is worked for floors in our workshop. Marble can be honed or polished, and a water-based protective treatment helps repel oil and wine stains without changing how the stone looks.

How much Crema Marfil do you have now for floors?

Right now 12 bundles that fit, with 494 slabs (2,253 m²) and thickness 2 and 3 cm; MDC-155 is the largest (55 slabs, 2.74 × 1.69 m).

Do you ship Crema Marfil outside Italy?

Before shipping we photograph the bundle and prepare a slab-by-slab list with numbers and sizes; the type of packing (A-frames or crates) depends on destination and vehicle.

How is a floor in Crema Marfil laid and kept?

It is laid on a flat screed with a suitable adhesive and thin joints. A protective treatment repeated now and then repels oil and wine; marked marble can be re-polished in the workshop.

WhatsApp
Crema Marfil for floors · slabs in Carrara