Marmi di Carrara, since 1956
Get a quote

Inventory · Bianco Carrara C

Bianco Carrara C for vanity tops: slabs and bundles in stock in Carrara

In the Carrara warehouse Bianco Carrara C is present with 15 bundles that suit vanity tops: 619 slabs, 2,820 m², thickness 2 and 3 cm and finish polished and honed. The average slab of MDC-31 measures about 2.65 × 1.75 m, and the bundle counts 54 slabs. From our own quarries.

Why Bianco Carrara C for vanity tops

Marble can be honed or polished, and a water-based protective treatment helps repel oil and wine stains without changing how the stone looks.

Vanity tops are made from 2 or 3 cm slabs with straight, bevelled or doubled edges; the usual depth is 50–55 cm.

On a marble vanity top perfumes, dyes and toothpaste can leave marks: a sealer and a honed finish help.

The light tone (white) reflects light and brightens rooms, but it shows stains and marks: the choice of finish matters more than with dark tones.

Thickness, weight and workmanship

In stock: thickness 2 and 3 cm. 2 cm ≈ 54 kg/m²; 3 cm ≈ 81 kg/m².

A long top comes from a single slab, avoiding joints; the front can be doubled to look thicker.

Indicative yield: each slab (2.65 × 1.75 m) gives about 6 tops of 120 × 50 cm, about 324 in the largest bundle.

Laying and care

Silicone goes on the joints with the wall and around the basin; the upstand is glued to the wall.

Of these bundles 4 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.

We also hold 5 blocks of Bianco Carrara C in stock: for a large project the block can be chosen and sawn to size.

Shipping and packing from Carrara

Open the bundle page, check the photo and size of every slab and send the request with the MDC number: we reply with availability and terms.

Bundles available

Frequently asked questions

What thickness should I choose for vanity tops in Bianco Carrara C?

For a vanity top 2 or 3 cm is fine; at 2 cm the front edge is doubled. In stock: thickness 2 and 3 cm.

Is Bianco Carrara C suitable for vanity tops?

Yes, Bianco Carrara C (marble) is worked for vanity tops in our workshop. Marble is a metamorphic limestone rock: it works well, takes a polish and has unique veining, but it reacts to acids (lemon, vinegar, some cleaners) that can dull the polished surface.

How much Bianco Carrara C do you have now for vanity tops?

Right now 15 bundles that fit, with 619 slabs (2,820 m²) and thickness 2 and 3 cm; MDC-31 is the largest (54 slabs, 2.65 × 1.75 m).

Do you ship Bianco Carrara C outside Italy?

Before shipping we photograph the bundle and prepare a slab-by-slab list with numbers and sizes; the type of packing (A-frames or crates) depends on destination and vehicle.

How do I protect a vanity top in Bianco Carrara C?

With a water-based sealer after laying and a soft cloth to dry it. A protective treatment repeated now and then repels oil and wine; marked marble can be re-polished in the workshop.

WhatsApp
Bianco Carrara C for vanity tops · slabs in Carrara