Bianco Carrara C for tables: slabs and bundles in stock in Carrara
Bianco Carrara C for tables: the warehouse holds 3 bundles with thickness 3 cm, in all 130 slabs and 580 m², finish polished and honed. Bundle MDC-94 (49 slabs, 2.79 × 1.66 m) is the one to start from when you need a lot of material with the same veining. From our own quarries.
Why Bianco Carrara C for tables
In marble every slab has its own veining: choosing slabs from the same bundle keeps the pattern continuous from one piece to the next.
For a dining table the slab is cut as a rectangle, oval or circle; if a long top is needed, a single slab avoids joints in the middle.
The light tone (white) reflects light and brightens rooms, but it shows stains and marks: the choice of finish matters more than with dark tones.
Thickness, weight and workmanship
In stock: thickness 3 cm. 3 cm ≈ 81 kg/m².
The top is cut to shape (rectangular, oval, round) and finished on the edges; the slab is chosen also for how the veining falls at the centre.
Indicative yield: each slab (2.79 × 1.66 m) gives about 1 tops of 200 × 100 cm, about 49 in the largest bundle.
Laying and care
The top rests on the base with rubber spacers and hidden fixings; the weight per square metre is used to choose the supports.
We also hold 5 blocks of Bianco Carrara C in stock: for a large project the block can be chosen and sawn to size.
Shipping and packing from Carrara
If you do not yet know how many m² you need, use the slab calculator and then ask for the quote; we can reserve several slabs of the same bundle for you.
Bundles available

Bianco Carrara C MDC-94
49 slabs, 3 cm, polished, 2.79 × 1.66 m, yield ≈ 49 tops of 200 × 100 cm

Bianco Carrara C MDC-33
44 slabs, 3 cm, polished, 2.68 × 1.63 m, yield ≈ 44 tops of 200 × 100 cm

Bianco Carrara C MDC-35
37 slabs, 3 cm, honed, 2.58 × 1.68 m, yield ≈ 37 tops of 200 × 100 cm

Bianco Carrara C MDC9118
block 242×167×133 cm, 14.5 t

Bianco Carrara C MDC9200
block 284×119×158 cm, 14.4 t

Bianco Carrara C MDC9199
block 236×156×126 cm, 12.5 t
Frequently asked questions
What thickness should I choose for tables in Bianco Carrara C?
For a table top 3 cm is the minimum for good sturdiness, 4 cm for long tops or overhangs. In stock: thickness 3 cm.
Is Bianco Carrara C suitable for tables?
Yes, Bianco Carrara C (marble) is worked for tables in our workshop. In marble every slab has its own veining: choosing slabs from the same bundle keeps the pattern continuous from one piece to the next.
How much Bianco Carrara C do you have now for tables?
Right now 3 bundles that fit, with 130 slabs (580 m²) and thickness 3 cm; MDC-94 is the largest (49 slabs, 2.79 × 1.66 m).
Do you ship Bianco Carrara C outside Italy?
Before shipping we photograph the bundle and prepare a slab-by-slab list with numbers and sizes; the type of packing (A-frames or crates) depends on destination and vehicle.
How much does a table in Bianco Carrara C weigh?
At 3 cm one square metre weighs about 81 kg/m²; a 2 m² top weighs twice that, so a sturdy base is needed. A protective treatment repeated now and then repels oil and wine; marked marble can be re-polished in the workshop.
