marble wall cladding · Carrara · 1956
Marble wall cladding · photo 8 from our archive

In short
Marble wall cladding: looking for ideas? Here is a photo (horizontal shot) with suitable materials, common finishes and advice from people who have worked stone in Carrara since 1956.
Typical applications: headboards and panelling, reception backdrops and entrances and lobbies. Interior walls need only 1-2 cm; thin or lightweight panels reduce weight and loads; large slabs call for studied fixings and joints. Polished, honed or satin; the veining can be book-matched for a symmetrical pattern on the wall.
- Space
- marble wall cladding
- Applications
- interior walls, entrances and lobbies, lift linings, shower walls
- Typical thickness
- Interior walls need only 1-2 cm; thin or lightweight panels reduce weight and loads; large slabs call for studied fixings and joints.
- Finishes
- Polished, honed or satin; the veining can be book-matched for a symmetrical pattern on the wall.
- Care
- A soft, barely damp cloth is enough; avoid acidic products. Wear on walls is low, but splashes of water and soap should be dried in wet areas.
- Suggested materials
- Calacatta Oro, Statuario, Arabescato
- Size
- 1600 × 1067 px
- Photo
- Marmi di Carrara srl
Suitable materials
Materials to consider for this use: Calacatta Oro, Statuario, Arabescato. These are suggestions, not the material shown in the photo: we choose together on samples and slabs in stock.
Related products
Where it is used
Shipping worldwide
We ship worldwide from Carrara. See the pages for the countries we serve: United Arab Emirates, Saudi Arabia, United States, France. Timing and documents change from country to country and are set out in the quote.
- Wall cladding · United Arab Emirates
- Wall cladding · Saudi Arabia
- Wall cladding · United States
- Wall cladding · France
Our own quarries and workshops. We own the quarries of Statuario, Calacatta, Bianco Carrara, Bardiglio and Travertine; all other materials are imported directly and worked in our own workshops.
Frequently asked questions
Marble wall cladding: which finishes are chosen?
Polished, honed or satin; the veining can be book-matched for a symmetrical pattern on the wall. Before ordering we can show you samples and slabs.
Marble wall cladding: how do you clean and maintain it?
A soft, barely damp cloth is enough; avoid acidic products. Wear on walls is low, but splashes of water and soap should be dried in wet areas.
Marble wall cladding: do you ship abroad?
Yes, we export worldwide from Carrara with suitable packing and customs documents. Countries with a dedicated page: United Arab Emirates, Saudi Arabia, United States, France.
Marble wall cladding: can it be made to measure like the photo?
Yes, we work from drawings and measurements: sizes, edges, holes and cut-outs. You can start from a sketch or a photo and use our design tools before the quote.
Design this space
Try the space with our tools: choose marble, edges and sizes, or start from your own photo. Then ask us for a quote.
Like this project? Send us a sketch or drawing for a piece list and a quote.
Send your drawing →More photos of the same space
More ideas
Also search
- marble wall cladding · United Arab Emirates
- marble wall cladding · Saudi Arabia
- marble wall cladding · United States
- marble wall cladding · France
- marble shower walls
- onyx mosaics
- marble for entrance hall
- marble for hotel
- onyx for entrance hall
- onyx for hotel
- Arabescato marble for fireplaces
- Arabescato marble for shower walls












