marble wall cladding · Carrara · 1956
Marble wall cladding · photo 42 from our archive

In short
Marble wall cladding, a photo from our archive (horizontal shot). We outline materials, thicknesses, finishes and products to build a similar piece in natural stone, with international shipping from Carrara.
Typical applications: entrances and lobbies, lift linings and headboards and panelling. Interior walls need only 1-2 cm; thin or lightweight panels reduce weight and loads; large slabs call for studied fixings and joints. Polished, honed or satin; the veining can be book-matched for a symmetrical pattern on the wall.
- Space
- marble wall cladding
- Applications
- interior walls, entrances and lobbies, lift linings, shower walls
- Typical thickness
- Interior walls need only 1-2 cm; thin or lightweight panels reduce weight and loads; large slabs call for studied fixings and joints.
- Finishes
- Polished, honed or satin; the veining can be book-matched for a symmetrical pattern on the wall.
- Care
- A soft, barely damp cloth is enough; avoid acidic products. Wear on walls is low, but splashes of water and soap should be dried in wet areas.
- Suggested materials
- Arabescato, Onice Ambra, Bianco Carrara
- Size
- 1920 × 1440 px
- Photo
- Marmi di Carrara srl
Suitable materials
Materials to consider for this use: Arabescato, Onice Ambra, Bianco Carrara. These are suggestions, not the material shown in the photo: we choose together on samples and slabs in stock.
Related products
Where it is used
Shipping worldwide
We ship worldwide from Carrara. See the pages for the countries we serve: United States, Germany, Switzerland, United Arab Emirates. Timing and documents change from country to country and are set out in the quote.
- Wall cladding · United States
- Wall cladding · Germany
- Wall cladding · Switzerland
- Wall cladding · United Arab Emirates
Our own quarries and workshops. We own the quarries of Statuario, Calacatta, Bianco Carrara, Bardiglio and Travertine; all other materials are imported directly and worked in our own workshops.
Frequently asked questions
Marble wall cladding: how do you clean and maintain it?
A soft, barely damp cloth is enough; avoid acidic products. Wear on walls is low, but splashes of water and soap should be dried in wet areas.
Marble wall cladding: which marble should I choose?
It depends on use and taste. For this kind of work start from Arabescato, Onice Ambra, Bianco Carrara: these are examples, to be confirmed on real samples and slabs. We own the quarries of Statuario, Calacatta, Bianco Carrara, Bardiglio and Travertine; all other materials are imported directly and worked in our own workshops.
Marble wall cladding: what thickness is needed?
Interior walls need only 1-2 cm; thin or lightweight panels reduce weight and loads; large slabs call for studied fixings and joints.
Marble wall cladding: which finishes are chosen?
Polished, honed or satin; the veining can be book-matched for a symmetrical pattern on the wall. Before ordering we can show you samples and slabs.
Design this space
Try the space with our tools: choose marble, edges and sizes, or start from your own photo. Then ask us for a quote.
Like this project? Send us a sketch or drawing for a piece list and a quote.
Send your drawing →More photos of the same space
More ideas

backlit onyx and light panels

marble tables and furniture

marble sculptures and artworks

stone exteriors and façades
Also search
- marble wall cladding · United States
- marble wall cladding · Germany
- marble wall cladding · Switzerland
- marble wall cladding · United Arab Emirates
- onyx mosaics
- marble for entrance hall
- marble for hotel
- onyx for entrance hall
- onyx for hotel
- Arabescato marble for fireplaces
- Arabescato marble for shower walls
- Bianco Carrara marble for fireplaces








