Marmi di Carrara, since 1956
Get a quote

marble wall cladding · Carrara · 1956

Marble wall cladding · photo 29 from our archive

Marble wall cladding: idea 29, reception backdrops · Marmi di Carrara

In short

Marble wall cladding: looking for ideas? Here is a photo (horizontal shot) with suitable materials, common finishes and advice from people who have worked stone in Carrara since 1956.

What to ask at design stage: lift linings, reception backdrops, entrances and lobbies. Interior walls need only 1-2 cm; thin or lightweight panels reduce weight and loads; large slabs call for studied fixings and joints. A soft, barely damp cloth is enough; avoid acidic products. Wear on walls is low, but splashes of water and soap should be dried in wet areas.

Space
marble wall cladding
Applications
interior walls, entrances and lobbies, lift linings, shower walls
Typical thickness
Interior walls need only 1-2 cm; thin or lightweight panels reduce weight and loads; large slabs call for studied fixings and joints.
Finishes
Polished, honed or satin; the veining can be book-matched for a symmetrical pattern on the wall.
Care
A soft, barely damp cloth is enough; avoid acidic products. Wear on walls is low, but splashes of water and soap should be dried in wet areas.
Suggested materials
Calacatta Oro, Statuario, Arabescato
Size
1024 × 768 px
Photo
Marmi di Carrara srl

Suitable materials

Materials to consider for this use: Calacatta Oro, Statuario, Arabescato. These are suggestions, not the material shown in the photo: we choose together on samples and slabs in stock.

Slabs in stockAll materials

Related products

Where it is used

Shipping worldwide

We ship worldwide from Carrara. See the pages for the countries we serve: Italy, United Arab Emirates, United Kingdom, Germany. Timing and documents change from country to country and are set out in the quote.

Our own quarries and workshops. We own the quarries of Statuario, Calacatta, Bianco Carrara, Bardiglio and Travertine; all other materials are imported directly and worked in our own workshops.

Frequently asked questions

Marble wall cladding: how do you clean and maintain it?

A soft, barely damp cloth is enough; avoid acidic products. Wear on walls is low, but splashes of water and soap should be dried in wet areas.

Marble wall cladding: how much does it cost?

There is no single price: it depends on material, thickness, finish and processing (edges, holes, cut-outs). The Prices page shows indicative figures for the materials that have them; for your project we prepare a written quote.

Marble wall cladding: do you ship abroad?

Yes, we export worldwide from Carrara with suitable packing and customs documents. Countries with a dedicated page: Italy, United Arab Emirates, United Kingdom, Germany.

Marble wall cladding: what thickness is needed?

Interior walls need only 1-2 cm; thin or lightweight panels reduce weight and loads; large slabs call for studied fixings and joints.

Design this space

Try the space with our tools: choose marble, edges and sizes, or start from your own photo. Then ask us for a quote.

Like this project? Send us a sketch or drawing for a piece list and a quote.

Send your drawing →

More photos of the same space

All photos · marble wall cladding

More ideas

Also search

  • marble mosaics
  • marble shower walls
  • onyx mosaics
  • marble for entrance hall
  • marble for hotel
  • onyx for entrance hall
  • onyx for hotel
  • Arabescato marble for fireplaces
WhatsApp