Technical data sheet
Technical data sheet Salome
Marble · Italy · Imported directly and worked in our own workshops.


| Commercial name | Salome |
|---|---|
| Stone type | Marble |
| Origin | Italy — Imported directly and worked in our own workshops. |
| Petrography | The stone displays a cataclastic texture with a light gray to creamy background interspersed with red‑pink patches. It consists mainly of calcite crystals ranging from 0.19 mm to 1.9 mm, forming bands, and contains occasional quartz and sericite fragments. |
| Available finishes | polished, honed |
| Standard thicknesses | 2, 3 and 4 cm (slabs in stock); 6 cm for steps and 1 cm for tiles on request |
| Typical slab sizes | 240-300 × 140-190 cm (real sizes of each lot on its warehouse page) |
| Recommended uses | floors, wall claddings, bathrooms, kitchens, staircases · indoor; outdoor with care (non-polished finish, lot check) |
Indicative physical properties
| Technical data | Value | Standard | Source |
|---|---|---|---|
| Density | 2,650–2,750 kg/m³ | EN 1936 | typical value for the family |
| Water absorption | 0.1–0.4 % | EN 13755 | typical value for the family |
| Compressive strength | 90–160 MPa | EN 1926 | typical value for the family |
| Flexural strength | 8–20 MPa | EN 12372 | typical value for the family |
| Hardness (Mohs) | 3–4 | — | typical value for the family |
| Frost resistance | normally suitable (to be verified on the lot) | EN 12371 | |
Indicative values for the stone family: test certificates (EN 1936, EN 13755, EN 1926, EN 12372) for the chosen lot are provided on request.
Care and cleaning
Clean with lukewarm water and a pH-neutral detergent, microfibre cloth; never acids, vinegar, lemon, limescale remover, bleach or abrasives. Wipe liquids at once. Water- and oil-repellent protective treatment after laying and every 1-2 years on the most used surfaces (kitchen tops, bathrooms).
Lots available in stock
No lot published at the moment: ask for availability, the material is available to order.