Marmi di Carrara, since 1956
Get a quote

Port Laurent

Imported directly and worked in our own workshops.

Port Laurent marble sample · Marmi di Carrara
Move the mouse or your finger over the photo: the lens magnifies.

The block in 3D

Turn it with your finger or by tilting your phone. The six faces come from the same photo.

Request this material Port Laurent

We reply with photos of the slabs and a quote.

Data is used only to answer your request.

We use the data you enter only to reply and prepare the offer; we never sell it. Controller: Marmi di Carrara srl. Details, retention periods and your rights are in the privacy policy.

Design tools Edges and thickness in 3D Skirting boards Mouldings See it in your space Custom tables Custom bathroom

Port Laurent is a natural stone of the marbles family, from: Italy. Marbles are in general metamorphic rocks based on calcium carbonate: they polish well but are sensitive to acids, so a stain-protection treatment is advisable in kitchens and bathrooms.

Uses given on the sheet: floors, wall claddings, bathrooms, kitchens, staircases. Finishes: polished, honed.

The price depends on the available lot: ask for a quote with photos of the slabs. Available on order: we source it from the quarry within the time stated in the quote.

Characteristics

TypeMarble
OriginItaly
Finishespolished, honed
Usesfloors, wall claddings, bathrooms, kitchens, staircases
AvailabilityOn order
Indicative priceon request
Thicknesses and formatsSlabs are normally 2 and 3 cm thick; sizes are defined on the project and the material is cut to size in our workshop in Carrara.

Real sizes depend on the slabs of the lot: in the online inventory every lot lists the dimensions and a photo of each slab.

Commercial namePort Laurent
Stone typeMarble
OriginItaly — Imported directly and worked in our own workshops.
Available finishespolished, honed
Standard thicknesses2, 3 and 4 cm (slabs in stock); 6 cm for steps and 1 cm for tiles on request
Typical slab sizes240-300 × 140-190 cm (real sizes of each lot on its warehouse page)
Recommended usesfloors, wall claddings, bathrooms, kitchens, staircases · indoor; outdoor with care (non-polished finish, lot check)

Care and cleaning

Clean with lukewarm water and a pH-neutral detergent, microfibre cloth; never acids, vinegar, lemon, limescale remover, bleach or abrasives. Wipe liquids at once. Water- and oil-repellent protective treatment after laying and every 1-2 years on the most used surfaces (kitchen tops, bathrooms).

Indicative physical properties

Technical dataValueStandardSource
Density2,650–2,750 kg/m³EN 1936typical value for the family
Water absorption0.1–0.4 %EN 13755typical value for the family
Compressive strength90–160 MPaEN 1926typical value for the family
Flexural strength8–20 MPaEN 12372typical value for the family
Hardness (Mohs)3–4—typical value for the family
Frost resistancenormally suitable (to be verified on the lot)EN 12371

Indicative values for the stone family: test certificates (EN 1936, EN 13755, EN 1926, EN 12372) for the chosen lot are provided on request.

Lots available in stock

No lot published at the moment: ask for availability, the material is available to order.

Request a quote for this material →

Frequently asked questions about Port Laurent

How much does Port Laurent cost?
The price of Port Laurent depends on the available lot, thickness and processing. Ask for a quote with sizes and destination: we reply within one working day with photos of the slabs.
Where does Port Laurent come from?
Port Laurent is a marble with origin Italy. We work it in our workshop in Carrara.
What kind of stone is Port Laurent?
Marbles are in general metamorphic rocks based on calcium carbonate: they polish well but are sensitive to acids, so a stain-protection treatment is advisable in kitchens and bathrooms.
What is Port Laurent used for?
The uses given for Port Laurent are: floors, wall claddings, bathrooms, kitchens, staircases. Finishes given: polished, honed. We supply slabs, blocks and cut-to-size pieces, numbered and photographed.
Is Port Laurent available?
Available on order: we source it from the quarry within the time stated in the quote.
What thicknesses and sizes does Port Laurent come in?
Slabs are normally 2 and 3 cm thick; sizes are defined on the project and the material is cut to size in our workshop in Carrara. Real sizes depend on the slabs of the lot: in the online inventory every lot lists the dimensions and a photo of each slab.
How do you clean and maintain Port Laurent?
Clean with water and a neutral detergent; avoid lemon, vinegar and aggressive descalers, which dull the surface. A stain-protection treatment before installation reduces the risk of marks, especially in kitchens and bathrooms.
How do I order Port Laurent or ask for a sample?
Fill in the form on this page (private or professional, with the “sample” box if you want one) or message us on WhatsApp at +39 335 619 2407. We reply within one working day.
Can I see the slabs of Port Laurent before buying?
Yes: we send you photos of the lot’s slabs, and you can choose by video call from the yard or come to Carrara.

Similar materials

WhatsApp