Technical data sheet
Technical data sheet Pietra di San Lorenzo
Travertine · Italy · Imported directly and worked in our own workshops.


| Commercial name | Pietra di San Lorenzo |
|---|---|
| Stone type | Travertine |
| Origin | Italy — Imported directly and worked in our own workshops. |
| Available finishes | polished, honed |
| Standard thicknesses | 2, 3 and 4 cm (slabs in stock); 6 cm for steps and 1 cm for tiles on request |
| Typical slab sizes | 240-300 × 120-180 cm (real sizes of each lot on its warehouse page) |
| Recommended uses | floors, wall claddings, bathrooms, kitchens, staircases · indoor, outdoor |
Indicative physical properties
| Technical data | Value | Standard | Source |
|---|---|---|---|
| Density | 2,350–2,550 kg/m³ | EN 1936 | typical value for the family |
| Water absorption | 0.5–2.5 % | EN 13755 | typical value for the family |
| Compressive strength | 60–110 MPa | EN 1926 | typical value for the family |
| Flexural strength | 6–14 MPa | EN 12372 | typical value for the family |
| Hardness (Mohs) | 3–4 | — | typical value for the family |
| Frost resistance | normally suitable (to be verified on the lot) | EN 12371 | |
Indicative values for the stone family: test certificates (EN 1936, EN 13755, EN 1926, EN 12372) for the chosen lot are provided on request.
Care and cleaning
Porous stone with natural cavities: normally filled in the workshop. Clean with a neutral detergent, no acids. Sealer after laying and every 1-2 years; outdoors prefer non-polished finishes and a good drainage slope.
Lots available in stock
No lot published at the moment: ask for availability, the material is available to order.